This kit is comprised of various dupont housings and pins and is excellent for electronics prototyping. The kit includes the following items all packed in a plastic case for easy storage. We also sell the headers and pins seperately so you're able to quickly refil the case once you start getting low.
2.0mm pitch pin headers in breakable 40 way strips.Please note: If you require headers for standard 0.1" pitch (2.54mm) prototyping breadboards or PCB's then please see item HCCNIC0022.
These 2.54 Pitch headers are available in 6, 8 and 10 way and the pins measure approximately 15mm. We also stock a 4 way header, which is slightly shorter at 11mm.
These standard 2.54 Pitch headers are available in 4, 6, 8 and 10 way. Pins measure between 11 and 15mm in length. Their socket and long pin design means they can also be used interconnecting stacked circuit boards. They are also the same connector used in many common Arduino development boards and shields.
A 10 way jumper cable set with 2 standard pitch female connector strips at either end. This pack also includes two PCB mount 10 way male sockets and so provides a very low cost flexible way of interconnecting power and signals from one PCB to another...
A colourful range of single row pin headers. Sold in strips of 40 pins and have a pitch of 2.54mm/0.1" (standard pitch). They are also designed to be snapped into smaller lengths...
A 40 way strip of male pin headers. These can be broken into smaller pieces to match whatever number of ways you require. They use a standard PCB pitch of 0.1" so are compatible with most types of prototyping boards.Product code: HCCNIC0022Number of ways: 40Pin spacing (pitch): 2.54mm (0.1") Pin Length: 8mm x 3.2mmCurrent rating: 5A
2.0mm pitch male to male pin headers in breakable 40 way strips. Please note: In you require headers for standard 0.1" pitch (2.54mm) prototyping breadbords or PCB's then please see item HCCNIC0008
An extended version of our standard 2.54mm / 0.1" pitch header pins (HCCNIC0018). Provided in 40 pin strips, these header pins can be snapped into smaller segments.
PCB mountable DC power socket with a commonly used 2.1mm diameter centre pin. Model number: HCCOPW0007Plug size: 5.5mm x 2.1mmDimensions: L 14mm x H 11mm x W 9mm (excludes pins)
Temperature: -30~70oCRated Load: DC 30V 0.5AContact Resistance: <0.03 ohmInsulation Resistance >100M ohmWithstand Voltage: AC 500V(50Hz) 1 MinInsertion and Extraction Force: 3-20N Dimensions available on our support forum.
Pack of 5 high quality gold plated turned pin SIL headers in breakable 40 way male to male strips.
Pack of 5 high quality tin plated turned pin SIL headers in breakable 40 way male to female strips.Specification:Number of Pins: 40Lead Pitch: 2.54mmOverall Height: 7.5mmOverall Length: 102mmOperating Temperature Range: 0°C to +85°C
- Color: Blue - Material: Nylon PP6 - Rated voltage: 300V - Rated current: 16A - Contact resistance: 20M ohms - Insulation resistance: 5000M ohms/1000V - Voltage resistance: AC 1500V / 1Min
Rated voltage/Rated current:250V/16A Wire range:22-14 AWG, 1.5 mm2
10cm Female BEC Connector. High quality silicone coated wires.
Single row, 40 pins, 2.54mm pitch; Current rate: 1AMP, insulation resistance: 1000mohm (max), contact resistance: 30mohm (max); Dielectrlc voltage: AC 500V for one minute...
Arduino Stackable Header Kit. 2 x 6-pin 2 x 8-pin
Plastic + metal male 2.1mm (inner diameter) DC power plug with solider connections.
SEK Male Low Profile - pitch 2.54mm x 2.54mmBox Header
Tin plated shells and grounding boardlocks. Black insulators. 8.1mm spacing from front row of pins to panel face.
Single row, 40 pins, 2.54mm pitch; Current rate: 1AMP, insulation resistance: 1000mohm (max), contact resistance: 30mohm (max); Dielectrlc voltage: AC 500V for one minute
4-pin, 2.54mm pitch
A 6 pin BZ through hole connecter (B6B-ZR). This connector is the same type used on our PIC development board and programmers.