Search

New products

  • £ 6.49
    £ 6.49

    This large collection of heatshrink tubing comes in 8 sizes and 5 colours. The tubing will shrink (when heated) to half its supplied diameter.

  • £ 17.99
    £ 17.99

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

  • £ 17.99
    £ 17.99

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

  • £ 17.99
    £ 17.99

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

  • £ 17.99
    £ 17.99

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

  • £ 1.49
    £ 1.49

    Arcade style 24mm (body diameter) momentary push button. Fitted with removable switch give a responsive tactile feedback when pressed. The switch provides a normally open contact across two spade terminals. Body of push button includes two integrated clips for firmly securing it to the control panel without the need for screws. Available in a range of...

  • £ 2.99
    £ 2.99

    Arcade style 33mm (bezel diameter) illuminated momentary push button with microswitch. These push buttons come with all necessary parts, including button, 5-12V LED in holder, adapter ring, retaining nut and micro-switch. They are available in white (HCSWIT0043), green (HCSWIT0044), red (HCSWIT0045), blue (HCSWIT0046) and yellow (HCSWIT0047).

  • £ 9.99
    £ 9.99

    A ball top arcade style 4/8 way joystick. This joystick uses 4 standard micro-switches to give a precise, hard wearing and positive tactile feel and allows for up to 8 directions to be sensed. The restrictor plate fitted to the bottom of the joystick helps protect the micro-switches from excessive force whilst providing full freedom of movement in both...

  • £ 24.99
    £ 24.99

    This relatively large 360mm x 220mm solar panel has an active photovoltaic cell area of approximately 636.5cm² delivering up to 10 watts of solar power at a maximum voltage of 18V. The panel comes with integrated blocking diode to protect against reverse flow of energy. Colour coded 1 meter fly-leads with handy insulated crocodile clips allow the panel to...

  • £ 11.99
    £ 11.99

    ABS Enclosure suitable for PINE A64/A64+ boards. Has separate cutouts for HDMI/Ethernet/microUSB power connectors and one cutout for USB audio/wifi connectors on opposite side. The case lid has the Pine64 logo embossed onto it.

  • £ 13.99
    £ 13.99

    This module is made specifically for the PINE A64 and A64+ model and does not work with any other device. It seamlessly integrates into the board and the A64 will automatically recognise the module plugged in.

  • £ 33.99
    £ 33.99

    PINE A64 is Single Board Computer powered by Quad-Core ARM Cortex A53 64-Bit Processor. It provides PI-2 Bus, Euler Bus and many others peripheral devices interface for makers to integrate with sensors and devices. Various Operating System (OS) are made available by open source community such Mainline Kernel, Ubuntu, Debian, Android, Remix OS, Windows IoT...

  • £ 23.99
    £ 23.99

    PINE A64 is Single Board Computer powered by Quad-Core ARM Cortex A53 64-Bit Processor. It provides PI-2 Bus, Euler Bus and many others peripheral devices interface for makers to integrate with sensors and devices. Various Operating System (OS) are made available by open source community such Mainline Kernel, Ubuntu, Debian, Android, Remix OS, Windows IoT...

  • £ 8.99
    £ 8.99

    The WeMos Mini D1 OLED shield is a tiny 0.66" 64 x 48 pixel OLED display. Using OLED display technology means that not only is the display very bright and clear with a high contrast ratio but has a much lower power consumption when compared to other display technologies such as back lit LCD. It is also very visible in both...

  • £ 4.99
    £ 4.99

    The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying...

  • £ 5.99
    £ 5.99

    The WeMos I2C Dual Motor Driver Module is designed to be able to drive up to two DC motors from your WeMos mini or mini Pro development boards (See HCWEMO0002). Using PWM the shield is capable of independently controlling the speed and direction of each connected motor with a maximum average of up to 1.2A (3.2A peak). The shield, together with its...

  • £ 4.49
    £ 4.49

    The DHT Shield is a digital temperature and humidity sensor utilising the DHT11 sensor. Temperature range is 0~60C (+/-2C) and the humidity range is 20-90%RH (+/-5%RH). 

  • £ 3.49
    £ 3.49

    This shield is designed for use with the WeMos D1 mini and mini Pro development boards (see item HCWEMO0002). The shield provides a means of allowing a WeMos D1 mini to directly communicate with most types of microSD card. The shield is also compatible with the standard Arduino SD card library. The shield is supplied with 3 sets of headers (requires...

  • £ 2.49
    £ 2.49

    This prototyping shield is designed for use with the WeMos D1 mini and mini Pro development boards (see item HCWEMO0002). It allows you to create your own custom WeMos shield which can then be plugged directly into the WeMos mini. Supplied with the PCB are 3 sets of headers (requires soldering) which also allow for multiple shields to be stacked on top of...

  • £ 3.99
    £ 3.99

    This relay shield is designed to be used with the WeMos mini & mini Pro ESP8266 based development boards (see item HCWEMO0002). Adding this shield to your WeMos mini development board provides it with the ability to switch high voltage, or high power devices from a single digital pin. Included with the shield is a set of...

  • £ 6.99
    £ 6.99

    The WeMos D1 min PRO is a miniature wireless 802.11 (Wifi) microcontroller development board. It turns the very popular ESP8266 wireless microcontroller module into a fully fledged development board. Programming the D1 mini pro is as simple as programming any other Arduino based..

  • £ 8.99
    £ 8.99

    The WeMos D1 R2 Uno based ESP8266 a wireless 802.11 (Wifi) microcontroller development board compatible with the Arduino IDE. It turns the very popular ESP8266 wireless (WiFi) module into a fully fledged development board. The layout of this board is based on a standard Arduino hardware design...

  • £ 2.49
    £ 2.49

    Our mini sensor bundles come complete with a project sheet which explains how to make the correct connections, along with the module(s) and cables you need to set up the project. All you need to add is your own development board. If you've not got a development board, we recommend the Hobby Components Uno R3 for beginners as it's the most robust of the...

  • £ 2.49
    £ 2.49

    Our mini sensor bundles come complete with a project sheet which explains how to make the correct connections, along with the module(s) and cables you need to set up the project. All you need to add is your own development board. If you've not got a development board, we recommend the Hobby Components Uno R3 for beginners as it's the most robust of the...