22 Item Items
Warning: Last items in stock!
This item (HCTEST0022) is based on our Cypress CY7C68013A development board. We have taken this item and turned it into a fully usable 16 channel logic analyser with 24MHz sampling rate. The board comes bundled with test clips and is programmed to make it compatible with the Open Source sigrock software. When used with the sigrok PulseView software you can capture and decode up to 16 digital channels at a maximum sample rate of 24MHz. The software includes built in decoders for many types of protocols including CAN, I2C, JTAG, SPI, UART and so on. The analyser is powered from a USB cable and operates at 3.3V but its digital inputs are 5V tolerant making it safe to use with both 3.3V and 5V logic levels.
The development board within this bundle has been pre-programmed with firmware to act as a 16 channel logic analyser. If you are intending to purchase this item for any purpose other than to be used as a logic analyser with the Sigrok software then we recommend purchasing our standard development board version which will be pre-programmed with the default Cypress firmware and USB VID/PIDs:
We only support use of this item with the Sigrock software.
Compatible with Windows XP/Vista/7/8/10 32 & 64 bit.
16 Channel input
24MHz sampling rate
Led power indicator
Powered by USB
Compatible with 3.3V and 5V logic levels.
Sampling depth: 1T
EEPROM selector jumper.
Sampling rates can be set as follows:
24MHz*, 16MHz*, 12MHz*, 8MHz*, 6MHz*, 4MHz*, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz, 20KHz
*Sampling rates at 4MHz and above will be dependant on system performance including the speed of your computer and the USB interface it is connected to.
Package contents include:
1x logic analyser device
1x USB cable
1x 20 way Female to Female Dupont cable
1x 20 way Male to Female Dupont cable
Further information, including downloads, can be found on our support forum here.
This item (HCTEST0022) is based on...