V1.2 Mechanical End stop...
These mechanical end stops are quiet simply a means to an end. They detect when an x/y/z stage...
This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It has a central mounting hole on the front side to allow for three point mounting.
This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It has a central mounting hole on the front side to allow for three point mounting. This is much easier for bed levelling in comparison to 4 point mounting. Additionally, the solder pads have been greatly increased in size, making it much easier and allowing for the use of 1206 surface mount components. Please note however, that this does not remove the need to use proper strain relief. We also supply suitable surface mount LED's and resistor as an option.
Specification:
Dimensions (Outer): 214mm x 214mm
Dimensions (Heat Bed): 200mm x 200mm
Resistance (12V): 0.9 - 1.6 Ohms
Resistance (24V): 3.5 - 5.9 Ohms
Operating voltage: 12 or 24 Volts
Operating current (12V): 7.4 - 12.7 Amps
Operating current (24V): 4.1 - 6.6 Amps
Wattage (Typ): 115W (12V) / 120W (24V)
These mechanical end stops are quiet simply a means to an end. They detect when an x/y/z stage...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
The MK2a version of the heat bed PCB has a central mounting hole on the front...
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a...
This module is based upon the HR4988 stepper motor driver and is ideal for use in 3D printer,...
High tolerance dual V wheels great for use with V wheel linear guide systems. Its double V...
Excellent for 3D printer heatbeds, this leveling screw set comprises M3 leveling screw...
Brass nozzle for common types of 3D printer a6 a8 MK8 Extruder Makerbot 3d etc. Accepts 1.75mm...
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a...
This extruder heatsink measures 40mm x 40mm and is 11mm deep. The centre hole is approximately...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
High temperature stainless steel 3D printer heat break suitable for 1.75mm fulfillment. This...
3d printer MK7 compatible stainless steel extrusion gear for 1.75mm filament. Includes grub...
This 7mm drag chain helps to maintain the life of wires used in numerous machines, including...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
A 40W heater cartridge suitable for 3D printers (e.g. Reprap Mendel Prusa) with a 24V supply....