2x4 PCB Mounted Mini Breadboard
A miniature breadboard in a 4 row of 2 configuration designed to be soldered to a PCB or prototype board. This allows you to build a prototyping solution directly into your own PCB. The breadboard can be soldered to your PCB via 4 pins on the underside. These provide connection to each 2 hole pair.
A miniature breadboard in a 4 row of 2 configuration designed to be soldered to a PCB or prototype board. This allows you to build a prototyping solution directly into your own PCB. The breadboard can be soldered to your PCB via 4 pins on the underside. These provide connection to each 2 hole pair.
Model number: HCPROT0063
Hole pitch: 2.54mm
Dimensions: 18.3 x 8.25 mm
Height above PCB: 8.25 mm
Max voltage: 300V
Max current: 3.5A
Specific References
16 other products in the category
Breadboard base panel for...
Prototyping base board for use together with mini breadboards (HCPROT0055 to HCPROT0061). This...
10cm Tinned Jumper Cable...
These jumper cables have tinned ends and measure approximately 10cm in length. Their outer...
WeMos Header Pin Set
A set of 8 pin headers for WeMos boards and shields. This pack consist of 2 x long pin (10mm)...
Double Sided Prototping PCB...
Double-sided prototyping board (HCPROT0065) measuring 60mm x 40mm. Made from 1.6mm glass fiber...
Acrylic Prototyping...
This clear acrylic platform is excellent for keeping your Uno and Breadboard in place whilst...
5x5 Mini breadboards in...
These tiny breadboards are not only fun but also have a particle side for prototyping...
Double-Sided Glass Fiber...
- Color: Green
- Material: Glass fiber
- Hole diameter: 1.0mm
- Hole pitch:...
Prototyping Shield PCB Board
PCB used for Arduino UNO Prototyping, Soldering and assembly required, great DIY part