EDTracker DIY PCB
This is the latest Revision 3 PCB which allows you to simplify your build of a DIY EDTracker -...
We will be closed on Friday 29th March to Monday 1st April for a public holiday here in the UK. Any orders placed during these days will be dispatched on Tuesday 2nd April. We apologise for any inconvenience and wish you all a Happy Easter.
Double-sided prototyping board (HCPROT0065) measuring 60mm x 40mm. Made from 1.6mm glass fiber FR4 PCB material it has a very sturdy feel. The board has a grid of drilled (1mm hole) tinned pads in a 20 x 14 grid.
Double-sided prototyping board (HCPROT0065) measuring 60mm x 40mm. Made from 1.6mm glass fiber FR4 PCB material it has a very sturdy feel. The board has a grid of drilled (1mm hole) tinned pads in a 20 x 14 grid. Pads are on both upper and lower sides allowing for soldering of components to both sides and a labeled around the edges to make positioning of components easier. Two rows of large pads at either end allow for securely soldering wires to the PCB. Finally four 2.5mm holes at each corner of the board provide a means of securing the PCB using M2 screws.
Product code: HCPROT0065
Color: Green
Dimensions: 60mm x 40mm x 1.6mm
Material: Glass fiber FR4
Hole diameter: 1.0mm
Hole pitch: 2.54mm
Suitable for experiments, electronic designing and DIY etc.
This is the latest Revision 3 PCB which allows you to simplify your build of a DIY EDTracker -...
- Input voltage: 6.5~12V or USB
- Output voltage: 3.3V / 5V
- Max Output current:...
PCB used for Arduino UNO Prototyping, Soldering and assembly required, great DIY part
A miniature breadboard in a 4 row of 2 configuration designed to be soldered to a PCB or...
These jumper cables have tinned ends and measure approximately 10cm in length. Their outer...
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. There...
This prototyping/programming board is designed for use with the Atmel ATMega48P, ATMega168P,...