TinyCircuits Proto2 TinyShield

HCTICI0008

New

These proto boards bring many of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

More details

This product is currently out of stock.

£ 3.49

£ 3.49

+ wishlist

These proto boards bring many of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

To use a prototyping board you can solder in a header type connector, or just solder wires directly into the correct hole for the signals that you need. Attach it to the top of the stacked connectors on your TinyDuino, and now your wire is connected back to that signal on the TinyDuino processor boards.

Model Number: ASD2003
Ultra compact size and weight (smaller than a US Quarter!)
Square Version: 20mm x 20mm (.787 inches x .787 inches)
Circular Version: 20mm (.787 inches) diameter
Max Height (from lower bottom TinyShield Connector to upper PCB level): 2.81mm (0.111 inches)
Weight: TBD grams (TBD ounces)

Viewed products