USB to RS232 TTL Serial Interface Cable
£2.99
VAT included
USB to RS232 TTL PL2303HX auto converter module adapter with a 5V output, which provides the most convenient way to connect your RS232 TTL devices to your computer via the USB port. The cable has a built-in TTL COM PC-PL2303HX Chip and uses a standard USB type A male and TTL 4 pin connector. The cable length is approximately 100cm in length.
USB to RS232 TTL PL2303HX auto converter module adapter with a 5V output, which provides the most convenient way to connect your RS232 TTL devices to your computer via the USB port. The cable has a built-in TTL COM PC-PL2303HX Chip and uses a standard USB type A male and TTL 4 pin connector. The cable length is approximately 100cm in length.
The interface cable uses the standard prolific drivers.
Windows Drivers: (http://www.prolific.com.tw/US/ShowProdu ... 25&pcid=41)
WINDOWS 8/VISTA/10 USERS:
The latest Prolific of the drivers for the supplied cable breaks compatibility with newer version of windows. If you have problems getting the driver to work please see the product forum post for this cable for a solution here.
Pinout:
Black - GND
Green - TXD
White - RXD
Red - VCC (5V)
Datasheet available on our support forum here.
HCCABL0015
144 Items
Specific References
4 other products in the category
Silicon Labs CP2102 3.3V...
A high performance USB to UART interface allowing you to communicate with serial devices such...
£2.99
- Currently Out of Stock
FTDI USB Serial Port Adapter
- FT232RL chip
- Both 5V/3.3V supply outputs
- Supports 300bps~3Mbps between each...
£5.99
- Currently Out of Stock
USB to RS232 TTL PL2303HX auto converter module adapter with a 5V output, which provides the most convenient way to connect your RS232 TTL devices to your computer via the USB port. The cable has a built-in TTL COM PC-PL2303HX Chip and uses a standard USB type A male and TTL 4 pin connector. The cable length is approximately 100cm in length.