Switches

Active filters

  • 7mm x 7mm Non-Locking Tact...

    £1.24

    Available in locking and non-locking, these tact switches measure 7mm x 7mm and have a height of approximately 16mm (including pins). Each switch has 6 DIP pins.

    If you require the locking version, you can find those here.

    In-Stock!
  • 12mm Switch Cap with...

    £0.41

    These switch caps are designed for use with HCSWIT0022 - Simply choose your colour from the list opposite. Each cap comes with a transparent cover, allowing you to add a label to the cap itself and then cover it for protection (and to extend the labels life). The caps are currently available in the following colours...

    In-Stock!
  • Round 12mm Switch Cap...

    £0.33

    These switch caps are designed for use with HCSWIT0022 - Simply choose your colour from the list opposite. The caps are currently available in the following colours:

    HCSWIT0060: Red

    HCSWIT0061: Green

    HCSWIT0062: Black

    In-Stock!
  • 6mm x 6mm Mini Tact...

    £0.41

    Measuring approximately 6x6x4.3mm, these switches have 2 pins (if you need a 4 pin switch, these are available here). The pin length of these is approximately 5.5mm. The rated load is 0.1A 12V (DC) with a contact resistance of <=0.03ohm.

    In-Stock!
  • 6mm Toggle Switch 6A 125V

    £0.74

    These toggle switches are 3-pin versions and are latching type switches, meaning once you move the toggle, it will remain in place (latched) until you move it again.

    Specification
    Voltage: 6A 125V
    Type:MTS-102
    Pin number:3-Pin
    Position: 2 (On-On)
    Mounting hole:1/4"(6mm)

    In-Stock!
  • 6mm Tactile Push Button...

    £0.41

    Available in various colours, these switch caps fit our 6mm switches, however we have successfully used them on 7mm switches, too. These are available in the following colours:

    HCSWIT0068 – Green
    HCSWIT0069 – Yellow
    HCSWIT0070 – Red
    HCSWIT0071 – Black
    HCSWIT0072 – White

    A discount is applied when you order 10 or more caps.

    In-Stock!
  • Capacitive Touch LED Toggle...

    £1.91

    A small illuminated capacitive toggle switch. This touch sensitive switch will toggle between its on and off state each time its front panel is touched (note that the switch can be modified to operate as a momentary switch - see note below). When in the on state the switch will illuminate via an LED backlight changing the switch from the opaque white to one of 4 colours (red, yellow, green or...

    In-Stock!
  • Emergency stop switch - 40mm

    £2.49

    A large resettable emergency stop button. Made from ABS plastic this button has a large 40mm mushroom head to allow for fast actuation in emergency situations. Once pressed the switch will lock into its triggered position and can be reset by twisting the head a quarter turn in the...

    In-Stock!
  • Momentary on-off Push...

    £0.83

    Low-cost, miniature push-to-make switch with a round black actuator button.

    Ideal for school projects and prototyping
    Non-locking
    Rated 125V AC 250mA
    Panel cut-out 7mm
    Dimensions 28mm long, Ø10.5mm

    In-Stock!
  • Momentary on-off Push...

    £0.83

    Low-cost, miniature push-to-make switch with a round black actuator button.

    Ideal for school projects and prototyping
    Non-locking
    Rated 125V AC 250mA
    Panel cut-out 7mm
    Dimensions 28mm long, Ø10.5mm

    In-Stock!