Hobby Components Electronics Kit


Hobby Components Electronic Kit contains a whole array of items for any electronics hobbyist.


Hobby Components Electronic Kit contains a whole array of items for any electronics hobbyist.

  • 1 x 830 point Solderless Breadboard MB-102
    • 1 terminal Strip, tie-point 630, 2 Distribution Strips, tie-point 200, Size: approx. 16.5x5.5x1cm
  • 1 x 65 Jumper Cable Bundle
    • Assorted Colours, Cable length: Assorted - Between 11.5cm and 20cm, Can be used between any female headers or between two points on the breadboard, 65 pieces per pack
  • 1 x Breadboard Power Supply Module
    • Compatible with 5V, 3.3V; Input voltage of 6.5-12V (DC) or USB power; Output voltage of 3.3V, 5V Switchable; Maximum output current of 700mA; two-way independent control; can be switched to 0V, 3.3V, 5V; two sets of on-board 3.3V, 5V DC output pins to facilitate the external leads
  • 10 x Mini Push Buttons
    • Dimensions: 6mm x 6mm x 6mm
  • 1 x Crystal Kit
    • Kit contains one each of: 4.000, 6.000, 7.3728, 8.000, 10.000, 11.0592, 12.000, 12.228, 16.000, 20.000, 22.1184, 24.000, 25.000 and 48.000 (MHz), and 32.768 (KHz).
  • 1 x Resistor Kit
    • Kit contains 400 per pack with a power rating of 1/4W and a tolerance of 1%. Values included are: 10 Ω, 22 Ω, 47 Ω, 100 Ω, 220 Ω, 470 Ω, 680 Ω, 1 K Ω, 2.2 K Ω, 4.7 K Ω, 6.8 K Ω, 10 K Ω, 22 K Ω, 47 K Ω, 68 K Ω, 100 K Ω, 220 K Ω, 470 K Ω, 680 K Ω, 1 M Ω
  • 1 x Ceramic Capacitor Kit
    • This kit contains 10 each of the following values: 1p 5p 6p 10p 15p 20p 22p 30p 33p 47p 68p 100p(101) 221 331 471 681 102(1nf) 222 332 472 103(10nf) 223 333 473 104
  • 1 x Electrolytic Capacitor Kit
    • Kit contains approximately 120 pieces: 50V 1UF / 50V 2.2UF / 50V 3.3UF / 50V 4.7UF/ 25V 10UF / 25V 22UF / 25V 33UF / 25V 47UF / 16V 100UF / 16V 220UF / 10V 330UF / 16V 470UF
  • 1 x Diode Kit
    • Kit contains approximately 100 pieces: 1N4148, 1N4007, 1N5819, 1N5399, 1N5408, 1N5822, FR107 and FR207
  • 1 x Transistor Kit
  • 1 x 3mm and 5mm LED Kit
    • Kit contains approximately 100 LEDs: Mixture of 3 and 5mm red, green and yellow.
  • 1 x Regulator
    • The L78xx series of three-terminal positive regulators is available in TO-220, TO-220FP, TO-3, D²PAK and DPAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents. Output current up to 1.5 A; Output voltage 5V; Thermal overload protection; Short circuit protection; Output transition SOA protection; 2% output voltage tolerance (A version); Guaranteed in extended temperature range (A version)
  • 1 x PP3 9V Battery Clip/Buckle
    • PP3 9V Battery Clip / Buckle. Ideal for connecting a 9V PP3 battery to your project. Colour coded wires with tinned ends for convenient soldering

Specific References