Our hugely popular low cost 8 channel analyser (HCTEST0006) is designed to work with the sigrok open-source signal analysis software suite giving this analyser a feature list normally found on analysers costing significantly more. When used with the sigrok PulseView software you can capture and decode up to 8 digital channels at a maximum sample rate of 24MHz*. The software includes built in decoders for many types of protocols including CAN, I2C, JTAG, SPI, UART and so on.  THIS BUNDLE REQUIRES INCLUDED HEADER PINS TO BE SOLDERED TO TEST CLIPS.

For more information about sigrok software please visit the sigrok wiki site: 

http://sigrok.org/wiki/Main_Page

8 Channel input
24MHz sampling rate
Led power indicator
Led logic level indicator for channel 0
Powered by USB
Sampling depth: 1T

Sampling rates can be set as follows:
24MHz*, 16MHz*, 12MHz*, 8MHz*, 6MHz*, 4MHz*, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz, 20KHz

*Sampling rates at 4MHz and above will be dependant on system performance including the speed of your computer and the USB interface it is connected to.

Package contents include:
1 logic analyser device
1 USB cable
10 piece female to female DuPont cable
40 way 2.54mm pitch Header Strip (will require soldering to the clips)
2 x Red Test Clips
2 x Blue Test Clips
2 x Green Test Clips
2 x Yellow Test Clips
2 x Black Test Clips

sigrok PulseView Software:

Serial UART example:

JTAG Example:

Real Time Clock Example

ARM ETMv3 Example

EEPROM Example:

Z80 Example:

Example: Debuging SPI interface on an Uno+

For more information about this product including links to software and drivers please see our support forum here