AM2315 I2C Temperature &...
The Aosong AM2315 is a wall mountable temperature and humidity sensor (HCSENS0043) based on...
- Currently Out of Stock
A resistive strain gauge sensor with a 350 ohm nominal resistance which varies when a force is applied. By measuring the change in the sensors resistance a measurement of the force applied to it can be obtained. Note that strain gauges exhibit small changes in resistance and so this sensor should be used in a Wheatstone bridge...
A resistive strain gauge sensor with a 350 ohm nominal resistance which varies when a force is applied. By measuring the change in the sensors resistance a measurement of the force applied to it can be obtained. Note that strain gauges exhibit small changes in resistance and so this sensor should be used in a Wheatstone bridge configuration. If using with a microcontroller such as an Arduino we also recommend using our HX711 digital bridge sensor interface module (see SKU HCMODU0073). Alternatively, if only relative measurements are required please see our analogue strain gauge module (see SKU HCSENS0036) which includes this sensor and can be connected directly to a microcontrollers ADC input.
Nominal resistance(Ohm): 350
Tolerance: <±0.1%
Gauge factor: 2.00~2.20
Gauge factor resistance: <±1%
Strain limit: 2.0%
Fatigue life: >10
Metal foil: constantan alloy
Working temperature range: -30~+80℃
Temperature compensation: Aluminium(23)
Gauge Grid(mm) Dimensions(L×M): 3.2 x 3.06
Gauge Creep Code: M6 to O6
Example Application:
The Aosong AM2315 is a wall mountable temperature and humidity sensor (HCSENS0043) based on...
The TSL2561 (HCARDU0102) Luminosity sensor module is a light to digital interface module. The...
DS18B20 temperature sensor chip, waterproof, stainless steel probe, cable length: 100cm; Power...
Allows for sensing of solid objects within a fixed range (adjustable with on-board...
A simple but very useful module which uses a potential divider to reduce any input
This is a simple photosensitive resistance sensor module. The sensor has a digital output that...
The BMP180 is the function compatible successor of the BMP085, a new generation of high...
This 5mW laser module emits a small intense focused beam of visible red light. The example...
A side mounted waterproof float switch (HCSENS0015) which uses a magnet embedded in the float,...