PT2272 Wireless Module...
The PT2272-M4 (Rx) receiver module is designed to be used in conjunction with the PT2262 (Tx)...
This class 2 Bluetooth module (HC-05) comes programmed with firmware that allows it to pass the output of a serial communications port (default is 9600 baud) over a Bluetooth wireless connection with no software configuration....
This class 2 Bluetooth module comes programmed with firmware that allows it to pass the output of a serial communications port (default is 9600 baud) over a Bluetooth wireless connection with no software configuration. The module is mounted on a convenient mezzanine adapter board providing an interface for power and Tx/Rx serial communication. Additionally the module, by use of AT type text commands issued via the serial interface can be reconfigured from its default Bluetooth slave state to a Master state. This means that module can not only communicate with Bluetooth master devices such as PC's and smart phones, but also when in master mode it can automatically pair with a second module in its default slave configuration allowing an end to end serial communication over Bluetooth. Please note that whilst in master mode the module can only communicate with another module in slave mode or one of our HC-06 Bluetooth slave modules (HCARDU0004).
Specification:
● Bluetooth protocol: Bluetooth Specification v2.0+EDR
● Frequency: 2.4GHz ISM band
● Modulation: GFSK(Gaussian Frequency Shift Keying)
● Emission power: ≤4dBm, Class 2
● Sensitivity: ≤-84dBm at 0.1% BER
● Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
● Size: 28mm x 15 mm x 2.35mm
● Security: Authentication and encryption
● Profiles: Bluetooth serial port
● Power supply: +5V DC (5.5V max)
● Working temperature: -20 ~ +75 Centigrade
Further information available.
The PT2272-M4 (Rx) receiver module is designed to be used in conjunction with the PT2262 (Tx)...
The TB387 high powered module (HCMODU0089) provides a means of transmitting serial data over...
This item is a wireless remote controlled module with a battery operated transmitter fob. It...
Model: MX-FS-03V
Transmission Distance :20-200 m (dependent on supply voltage)
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
High quality adjustable angle antenna with integrated SMA connector. Designed for low power...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter...
The SmartRFy USB module adds the ability to monitor and control a SmartRFy network directly...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter...
- Remote control with 21 buttons
- Transmission Frequency: 38KHz;
- Launch Distance:...