This bundle consists of a complete retro arcade one player joystick and button setup, including a zero delay interface board and wiring loom. Within this kit you will get one 8-way heavy duty micro-switched joystick, 8 x 30mm and 2 x 24mm micro-switch push buttons, USB interface controller board and cables to connect everything to your PC / Raspberry Pi. No soldering is required.

Arcade style 24mm (body diameter) momentary push button. Fitted with removable switch give a responsive tactile feedback when pressed. The switch provides a normally open contact across two spade terminals. Body of push button includes two integrated clips for firmly securing it to the control panel without the need for screws. Available in a range of vibrant colours.

Arcade style 33mm (bezel diameter) illuminated momentary push button with microswitch. These push buttons come with all necessary parts, including button, 5-12V LED in holder, adapter ring, retaining nut and micro-switch. They are available in white (HCSWIT0043), green (HCSWIT0044), red (HCSWIT0045), blue (HCSWIT0046) and yellow (HCSWIT0047).

A ball top arcade style 4/8 way joystick. This joystick uses 4 standard micro-switches to give a precise, hard wearing and positive tactile feel and allows for up to 8 directions to be sensed. The restrictor plate fitted to the bottom of the joystick helps protect the micro-switches from excessive force whilst providing full freedom of movement in both joystick X and Y directions.

These push buttons come with all necessary parts, including button, LED in holder, adapter ring, retaining nut and micro-switch. They are available in Red (HCSWIT0029), Blue (HCSWIT0030), White (HCSWIT0031), Green (HCSWIT0032) and Yellow (HCSWIT0033).

These push buttons come with all necessary parts, including button, LED in holder, adapter ring, retaining nut and micro-switch. They are available in Red (HCSWIT0029), Blue (HCSWIT0030), White (HCSWIT0031), Green (HCSWIT0032) and Yellow (HCSWIT0033).

These push buttons come with all necessary parts, including button, LED in holder, adapter ring, retaining nut and micro-switch. They are available in Red (HCSWIT0029), Blue (HCSWIT0030), White (HCSWIT0031), Green (HCSWIT0032) and Yellow (HCSWIT0033).

These push buttons come with all necessary parts, including button, LED in holder, adapter ring, retaining nut and micro-switch. They are currently available in green (HCSWIT0032) and red (HCSWIT0029).

These push buttons come with all necessary parts, including button, LED in holder, adapter ring, retaining nut and micro-switch. They are currently available in green (HCSWIT0032) and red (HCSWIT0029).