COLLECTION ORDERS
We are accepting collection orders. However, we require that you place your order online so that we can prepare it in advance to minimise contact. Please wait for confirmation (via email) that the order is ready for collection. Whilst in the building, please maintain 2m distance from other members of the public and wear a face mask unless you are exempt from doing so.
New products
New products
Motors and Servos
Active filters
-
42BYGH47-401A Nema 17...
£11.66A larger version of our standard Nema 17 type stepper motor. This stepper motor (HCROBO0051) conforms the the Nema type 17 specification and has a motor case depth of 47mm. It has a step angle of 1.8° and is suitable for applications such as 3D printers and CNC machines.
-
DS05-NFC 360 degree servo
£5.83The DS05-NFC high torque servo (HCROBO0050) is able to rotate continuously in full 360 rotations in both forward (clockwise) and reverse (anti-clockwise) directions. It will accept standard servo signals for its input meaning it can be driven from just one 5V digital pin of a microcontroller. A pulse-width of 1ms will turn the servo at full reverse speed...
-
Micro coreless 6mm x 14mm...
£1.91Micro coreless 6mm x 14mm motor. Capable of rotating at speeds of up to 35000RPM. Suited for RC and minia... -
1.5V-3V 8 x 5mm Micro...
£1.24A tiny vibrating DC motor measuring just 8 x 5mm (excluding shaft). Ideal for various applications such as haptic feedback, micro robotics, toys etc.
-
-
MG946R Metal Gear Servo
£6.66The MG946R Servo is a popular high speed, high torque metal gear digital servo providing stable and shock proof opperation. Compliant with most standard receiver interfaces: Futaba, Hitec, Sanwa, GWS etc. Great for RC truck, Boat, Racing Car, Helicopter and Airplane and microcontroller projects.
-
-
-
-
130 1.5v-3v mini dc motor
£1.49Standard low voltage '130' type DC motor with two solderable terminals.
-
Stepper Motor and ULN2003...
£2.24The ULN2003 Stepper Motor Driver Board uses a ULN2003 IC to drive 4-phase, 5-wire stepper motors.
Supply Voltage: 5V (Supplied motor suitable for 5V applications)
Max Output Current: 0.5A (Single Output)
4 LED indicators
Size: 40.5mm x 21.3mm
Stepper Motor Cable Length (approx.): 24cm
Holding Torque: 0.3kg/cm
Diameter: 28mm
Step Angle: 5.625 degrees
Reduction Ratio: 1/64 -
F05102 N20 Micro Geared...
£5.83This N20 micro geared motor comes complete with a purpose designed friction fit wheel. Dimensions for which can be seen below. The motor itself is a 6V motor with a built-it metal gearbox and together has a rotational speed of 60 RPM (no load), and a load RPM of 48. These are used in our Maze Runner robot car (HCROBO0052) and have a nice high build quality feel to them.