Tiny Circuits

 

Active filters

  • TinyCircuits TinyLily 1206...

    £1.24

    A standard size LED in an extremely compact size of 10.2mm x 4mm, with two standard TinyLily sewtabs and a current limiting resistor, so you don’t have to worry about blowing it up or adding an external resistor. Available with Red, Green and Amber LED color options.

    In Stock
  • TinyShield Matrix LEDs (3...

    £11.66

    The TinyShield Matrix LED Boards is a 6 x 9 grid of LEDs (54 total LEDs) that are individually addressable, which lets you scroll text, draw images and all sorts of other things. This TinyShield is compatible with the popular Arduino LoL Shield Library (Lots of LEDs Shield) created by Jimmie Rodgers...

    In-Stock!
  • TinyShield 7 Segment Display

    £11.66

    The TinyShield 7 Segment Display Board contains two seven segment LEDs (Red LEDs) that can be set over the I2C (thus saving signals to do other tasks) by using aSemtech SX1506 I/O expander. Each of the segments, including the decimal indicator can be individually selected, and an easy to use library is provided to make it extremely easy to use.

    In-Stock!
  • TinyCircuits TinyLily 1206...

    £1.24

    A standard size LED in an extremely compact size of 10.2mm x 4mm, with two standard TinyLily sewtabs and a current limiting resistor, so you don’t have to worry about blowing it up or adding an external resistor. Available with Red, Green and Amber LED color options.

    In Stock
  • TinyScreen 96 x 64 OLED...

    £16.66

    TinyScreen is a beautiful colour OLED display for your TinyDuino system. Create video games, a video player, or your own smart watch using this Tiny OLED screen! The screen is 0.96" diagonal with a resolution of 96x64 RGB pixels, each with 16-bit colour. Since this is an OLED, there is no backlight needed and the screen is very bright with excellent colours. Four buttons are located along...

    Out-of-Stock
  • TinyShield Dual Motor

    £13.33

    The Dual Motor TinyShield allows you to drive two independently controlled DC brushed motors from your TinyDuino! Create your own tiny robots or drones! Using two of the super miniature but very powerful 2mm x 2mm TI DRV8837Motor Driver (H-Bridge) IC, this shield will allow for to 1.8A per channel and operate motors between 1.8 to 11V. This TinyShield...

    In-Stock!
  • TinyCircuits TinyLily Mini...

    £7.49

    The TinyCircuits TinyLily Mini is an Arduino compatible module in an ultra compact package. Designed to be used in e-textile and wearable applications, the TinyLily Mini is very similar to the Arduino LilyPad, with the same processing power and Arduino software compatibility – but at 1/12th the size!

    In Stock
  • TinyCircuits TinyLily Power...

    £3.74

    Connect up your TinyLily Mini to standard battery packs that use the JST-PH connector. You can also use this without the JST connector with two large through holes to connect to an external power supply or battery pack...

    In Stock
  • TinyCircuits Tinyduino...

    £11.66

    The TinyCircuits TinyDuino is an Arduino compatible board in an ultra compact package. Imagine the possibilities of having the full power of an Arduino Uno in a size less than a quarter! The TinyDuino processor board is roughly equivalent to the Arduino Uno board – same processor, same signals brought out to a shield connector. In fact, most Arduino sketches will work as is without any changes...

    In-Stock!
  • TinyCircuits USB & ICP...

    £12.08

    The TinyShield USB & ICP add USB support for the TinyDuino via a micro-USB connector and uses the very popular FTDI USB to Serial converter IC (as used on most standard Arduino models). Using this board allows you to download new sketches via the Arduino IDE to your TinyDuino, and also allows you to add USB communication capabilities to your projects. This board supports RX and TX status...

    In Stock
  • TinyCircuits USB TinyShield...

    £11.66

    The TinyShield USB & ICP add USB support for the TinyDuino via a micro-USB connector and uses the very popular FTDI USB to Serial converter IC (as used on most standard Arduino models). Using this board allows you to download new sketches via the Arduino IDE to your TinyDuino, and also allows you to add USB communication capabilities to your projects. This board supports RX and TX...

    In-Stock!
  • TinyCircuits x4 Motor...

    £13.32

    The TinyShield Motor x4 allows you to drive four independently controlled DC brushed motors from your TinyDuino! Using four of the super miniature but very powerful 2mm x 2mm TI DRV8837 Motor Driver (H-Bridge) IC, this shield will allow for to 1.8A per channel and operate motors between 1.8 to 11V...

    In Stock