Number of Pins: 16

Socket Type: DIL 0.3 Inch

The TMP36 is a low voltage, precision centi-grade temperature sensor which is functionally compatible with the LM50. It provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP36 does not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range...

Number of Pins: 20

Socket Type: DIL 0.3 Inch

Contact Plating: Tin

100pcs total.

6x AA cell ABS plastic battery holder (HCBATT0006) allowing for easy insertion and removal of batteries. The holder has colour coded wires with tinned ends allowing for easy solder to a PCB or terminal. It has two mounting holes for permanently fixing to a surface. Depending on battery type fitted this holder can provide approximately 6V DC for remotely powering your projects.

4-pin design; current: 0.1A; voltage: DC 30V...

The ATMega328-PU is the chip used in Arduino Uno development boards and is pre-programmed with the Arduino Uno bootloader. This makes this device ideal for use in your own projects or as a replacement for a damaged Uno.

N-Channel enhancement mode silicon gate power field effect transistors designed for applications such as switching regulators, switching converters, motor drivers, relay drivers and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. These types can be operated directly from integrated circuits.
150 oC

This pack contains 50 22pf Ceramic Capacitors rated at 25V.