This 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight. It also includes a serial I2C/IIC adaptor board pre-soldered to the back of the LCD....

This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be individually driven by applying a voltage to the appropriate module pin. 

PINOUT
PIN 1: RED LED +Ve
PIN 2: GREEN LED +Ve
PIN 3: BLUE LED +Ve
PIN 4: GND

This tiny 0.96 inch OLED display has a resolution of 128 x 64 pixels and uses a standard (configurable) serial interface for communication. Based on the SSD1306 controller, the module is available in both white and blue pixel colours. By default the module is configured to use an SPI interface for serial interface but can be modified (soldering required) to communicate via I2C protocol...

This tiny 0.96 inch OLED display has a resolution of 128 x 64 pixels and uses a standard (configurable) serial interface for communication. Based on the SSD1306 controller, the module is available in both white and blue pixel colours. By default the module is configured to use an SPI interface for serial interface but can be modified (soldering required) to communicate via I2C protocol...

This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS compatible shield (HC3DPR0002). Using this module allows you to print your designes without requiring a computer be connected to your printer. The module contains and 20 x 4 line backlit LCD display, buzzer, SD card reader, and control inputs. The module also includes cables and adapter board for...

This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers such a Pic, Atmel AVR, and Arduino.

LCD display module with yellow backlight.

The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display....

Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current limiting resistor must be used.
Product Code: HCOPTO0044

Pin information vailable on our support forum.

This the larger version of our 16x4 LCD display. Its 24 character by 4 line display has a very clear and high contrast white text upon a blue background/backlight. It also includes a serial I2C/IIC adaptor board pre-soldered to the back of the LCD....

A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The 5mm RGB LED's are arranged in an 8x8 dot matrix grid...

A 16 x 2 line alphanumeric character display. This LCD features a parallel interface supporting both 4 bit and 8 bit modes, a blue LED back-light, and a white transmissive font.