The Wemos/Lolin OLED module is a tiny 128x64 pixel low power...

The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...

The 2004 SmartLCD module is a serially controlled 4 line by 20 character alphanumeric LCD...

The SmartRFy sensor module adds the option to remotely monitor various sensors via a SmartRFy...

The...

The mLink port expander is a serial (I2C/IIC) digital I/O module. It allows you to add 12...

The SmartRFy sensor module adds the option to remotely monitor various sensors via a SmartRFy...

The SmartRFy USB module adds the ability to monitor and control a SmartRFy network directly...

The SmartRFy digital Rx module provides a set of 4 digital output pins which can be remotely...

The SmartRFy digital Tx module provides a set of 4 digital input pins which can be used to...

The Wemos/Lolin OLED module is a tiny 128x64 pixel low power...

The WeMos D1 mini PRO is a miniature wireless 802.11 (Wifi) microcontroller development board....

The Lolin D32 development board is based on the Espressif systems ESP32 low power system on a...

The Wemos triple base (HCWEMO0016) is designed to allow a Wemos shield to be connected to a...

The Wemos dual base (HCWEMO0015) is designed to allow a Wemos shield to be connected to a...

A set of 8 pin headers for WeMos boards and shields. This pack consist of 2 x long pin (10mm)...

The WeMos D1 mini Lite is a miniature wireless 802.11 (Wifi) microcontroller development...

The WeMos Mini D1 OLED shield is a tiny 0.66" 64 x 48 pixel OLED display. Using OLED display...

The WeMos WS2812B RGB Shield is a digital full colour (16777216 colour) RGB LED light source....

The...

The WeMos I2C Dual...

The DHT Shield is a digital temperature and humidity sensor utilising the DHT11 sensor....

This shield is designed for use with...

This prototyping shield is designed for use with the WeMos D1 mini and mini Pro development...

This relay shield is designed to be used with the WeMos mini & mini Pro ESP8266 based...

The WeMos D1 min PRO is a miniature wireless 802.11 (Wifi) microcontroller development board....

The WeMos D1 R2 Uno based ESP8266 a wireless 802.11 (Wifi) microcontroller development board...

This bundle contains (approx 20 per resistor) the...

This pin header has a standard pitch of 2.54mm. Overall height is 19.5mm with the pins being...

Bundle of TO-92 Transistors comprising 10 each of the following values:

Bundle of 70 diodes. The bundle contains 10 each of the following values:

M1...

This bundle of regulators contains a total of 70, 10 each of the following values:

Bundle of 0603 SMD LEDs containing 20 each of the following colours:

Red, Yellow,...

These photoresistors are supplied in a bundle containing 10 each of the following values:

This set of ceramic capacitors contains 30 different values, 10 each of the following:

Set of 180 transistors. Each value is supplied in a pack of 10. Values in the bundle are as...

100nF (0.1uF) 50V Ceramic Capacitors - Qty: 10

Low-cost, miniature push-to-make switch with a round black actuator button.

Ideal...

Low-cost, miniature push-to-make switch with a round black actuator button.

Ideal...

This Arduino Uno compatible development board is the ideal option for anyone who just wants to...

Designed as a means to easily go from your Arduino and breadboard prototype to a more...

This is our lower cost alternative to the standard R3 Uno, but in this case lower cost doesn't...

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328....

The Pro Micro is similar to the...

Building your own hardware is always fun especially when it's combined with the Arduino...

Our very own version of the popular Arduino Mega development board (HCARDU0092). It hast been...

This Arduino compatible board is specifically designed to drive a 3 colour RGB LED dot matrix...

The Arduino Pro Mini is a...

The Pro Micro is similar to the Pro Mini, except for the fact that it utilises the ATMega32U4....

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (

The Arduino Pro Mini is a microcontroller board based on the ATmega328. It...

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital...

This Arduino compatible Nano is a small, complete, and breadboard-friendly board based on the...

Additional add-on for our V2 4x4x4 Cube Kits. This PCB template has been designed to make...

This kits contains a selection of useful components and consumables aimed at allowing you to...

The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....

This prototyping/programming board is designed for use with the Atmel ATMega48P, ATMega168P,...

LED light cubes are a hugely popular and fun project. With this kit (HCKITS0050) you will have...

LED light cubes are a hugely popular and fun project and with this kit you will have all the...

This is an impressively low cost bundle of useful prototyping components. The pack consists of...

A fun little electronics project (HCKITS0027) that demonstrates...

An excellent and low cost bundle of useful components suitable for a multitude of electronics...

<sub>Description:

With this kit of parts (HCKITS0028) you can...</sub>

We've partnered up with the fabulous guys over at EDTracker to bring to you the EDTracker...

- Remote control with 21 buttons
- Transmission Frequency: 38KHz;
- Launch Distance:...

1 x 400 point Solderless Breadboard

High...

The Wemos/Lolin OLED module is a tiny 128x64 pixel low power...

The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...

The 2004 SmartLCD module is a serially controlled 4 line by 20 character alphanumeric LCD...

This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...

This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...

A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...

A 3.2" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...

This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...

This item is a 6 digit 7-segment LCD display module. It features large black LCD digits...

A small illuminated capacitive toggle switch. This touch sensitive switch will toggle between...

This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...

The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....

The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...

These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...

These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...

A break-out board for an integrated RGB LED module. The module has 3 separate LED's (Red,...

This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full...

This 45mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...

This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...