Pack of two low cost nylon 1045 (10 x 4.5") propellers (HCRECO0006), 1 x CW & 1x CCW. Supplied with adaptor hubs to fit motor shaft diamet...

The Reptile V500 (HCRECO0002) is a low cost but big on features and versatility 500mm quadcopter frame. The two level design provides numerous options for mounting var...

The Crius SE 2.5 flight controller board (HCRECO0001) is based and comes pre-programmed with the open source MultiWii flight controller system. This board is able to control various radio control aircraft including quad, hex, and octocopter designs. Its excellent stability allows for fully autonomous flight with FPV or any kind acrobatics. The board includes ...

This Motor is to be used with 3S Lipo battery pack

EMAX 935KV high efficiency outrunner brushless motor and 1045 propeller combo pack (HCRECO0005) is suitable for use with tri, quad, hex and octo m...

Hobbywing Skywalker 30A brushless electronic speed controller (HCRECO0004) with 2A 5V BEC supply suitable for use with most RC Arcraft in...

This PCB is designed to provide an easy and tidy means of distributing the power from a LiPo battery to multiple (up to 8) electronic speed controllers used in multi-rotor RC systems. With its ring and wide track distribution system this board will distribute the high currents demanded by ESC's and brushless motors. Large pads provide secure solder points...

Pack of 10 pairs (male and female) 3.5mm gold plated bullet / banana connectors.

Pack of 50 white nylon M3 bolts (phillips). Great for light weight, insulated, or corrosion resistant applications.



A: 5.3mm
B: 2.5mm
C: 5.mm
D: M3 x 0.5P

Pack of 50 white nylon M3 nuts. Great for light weight, insulated, or corrosion resistant applications.



A: 3mm (M3)
B: 2.5mm
C: 5.5mm

The RadioLink AT10 2.4GHz 10CH control system is extremely versatile and can be used by beginners and pros alike. Weighing less that 1KG, the AT10 is extremely light, given it's capabilities! Compatible with most types of RC aircraft including airplanes, gliders, helicopers and multicopters the A10 packs a huge amount of features normally found or more expensive units....

A set of two (rotating & counter rotating) miniature propellers. Suited for micro RC applications. Propellers will fit a motor shafts between 0.75 and 0.8mm. For a suitable motor please see our 6*14 MM Coreless Motor (HCROBO...

High power brushed DC motor ESC speed controller. Capable of controlling the speed of two brushed DC motors (connected by ESC in parallel) in both forward and reverse directions using a standard PWM signal generated by most R/C receivers. Power can be supplied from a 7.2 to 12V battery with a maximum continuous load of 15A. ESC comes with a Tamiya style battery connector. Two sets of fly leads...