Opening Times
M-F: 9.00 am - 4.30 pm
Sat: CLOSED
Free UK Shipping
On orders over £50
Guarantee
30 Day Money Back Guarantee
Contact Us
sales@hobbycomponents.com
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Search
New products
-
2.4 inch TFT Arduino Compatible Shield with Resistive Touch
This 2.4" Colour TFT is an Arduino compatible shield that will plug...
£ 9.00 -
3.2 inch Colour TFT Arduino Compatible Shield with Resistive Touch
This 3.2" Colour TFT is an Arduino compatible shield that will plug...
£ 10.99 -
2.4 inch Colour TFT Module with Resistive Touch
A 2.4" colour TFT display module compatible with 3.3V microcontrollers...
£ 9.99 -
3.2 inch Colour TFT Module with Resistive Touch
A 3.2" colour TFT display module compatible with 3.3V microcontrollers...
£ 12.99 -
8x8 Serial Dot Matrix Module
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs....
£ 3.00 -
HT1621 6 Digit 7 Segment LCD Module
This item is a 6 digit 7-segment LCD display module. It features large...
£ 3.99
£ 19.99Hobby Components Obstacle Avoidance Robot Kit
£ 19.99This robotic car kit is a complete kit of parts, including electronics, that will allow you to build a working robotic vehicle capable of traversing a flat surface whilst avoiding solid objects. The kit is aimed at both beginners and intermediate users who are looking for a low cost way to experiment with microcontrollers and robotics. Based around...
£ 0.6940mm Propeller for 130 motor
£ 0.69These propellers measure 4cm (40mm). The fixed aperture in the centre measures approximately 1.9mm.Diameter: 40mmRotating Circular Diameter: 40mmFixed Aperture: 1.9mm
£ 6.00Double speed encoder module
£ 6.00This bundle consists of two speed encoder photoelectric pulse output modules. The HC-020K speed sensor has a wide voltage range, a high resolution and a short response time.
£ 0.79N20 Motor Mount
£ 0.79These motor mounts are designed to fit N20 type motors which we also stock (see item HCROBO0035). The mounts are made of ABS and have a fixed hole diameter of 4mm. The centre between the two mounting holes measures approximately 27mm.
£ 2.49Omni-Directional Castor
£ 2.49This is a small omni-directional castor designed for small robotic vehicles. Use together with two drive wheels it can be used to construct a robot that can turn on its axis. This makes it ideal for small line or maze following robots (see out Maze Runner robot for an example).
£ 0.6927mm Plastic/Rubber Tyre
£ 0.69A 27mm diameter tyre consists of a durable nylon hub together with a solid tuber tyre. Its small and narrow dimensions makes it suited for small robotic vehicles such as line following or maze solving robots.
£ 6.99F05102 N20 Micro Geared Motor with Wheel
£ 6.99This N20 micro geared motor comes complete with a purpose designed friction fit wheel. Dimensions for which can be seen below. The motor itself is a 6V motor with a built-it metal gearbox and together has a rotational speed of 60 RPM (no load), and a load RPM of 48. These are used in our Maze Runner robot car (HCROBO0052) and have a nice high build...
£ 9.99Robotic Claw / Grabber (Black)
£ 9.99Improved design, please see notes.Suitable for use with our TowerPro MG946R Metal Gear Servo (HCROBO0009), this item comes as a kit and will need assembling. The servo is not included but can be found hereNotes:Other sellers are selling this item without the pillars to add height between the servo and claw body, which can cause problems when trying to...
£ 34.99Maze Runner - Arduino compatible Robot Car
£ 34.99This kit allows you to build your very own maze solving robot. It comes complete with everything you need including all the electronics motors and sensors. Just build the robot (soldering required), connect a PP3 battery (not included) and it's ready to go exploring. The kit also includes a book providing detailed instructions on how to build, commission,...
£ 60.00Hexapod4 18 DOF six leg robotic spider...
£ 60.00This six legged robot spider chassis is designed to be used with our SG90 9g micro servo (HCROBO0005). Each leg supports a total of 3 servos which allows the legs a full 18 degrees of freedom meaning the completed robot will ...
£ 19.99Hexapod4 18 DOF six leg robotic spider frame
£ 19.99This six legged robot spider chassis is designed to be used with our SG90 9g micro servo (HCROBO0005). Each leg supports a total of 3 servos which allows the legs a full 18 degrees of freedom meaning the completed robot will be able to walk, crab, turn and even climb over small obstacles. The kit comes supplied with a total of 25 black ac...
£ 1.69Micro 45mm propeller set
£ 1.69A set of two (rotating & counter rotating) miniature propellers. Suited for micro RC applications. Propellers will fit a motor shafts between 0.75 and 0.8mm. For a suitable motor please see our 6*14 MM Coreless Motor (HCROBO...
£ 6.4975 Piece Gear / Pulley / Belt Drive Set
£ 6.49Pack of 75 gears/pulleys/belt drives etcSet includes:9 Spindle Gears11 Crown Gears12 Single Gears19 Double Gear...
£ 3.99SG90 Pan & Tilt servo bracket
£ 3.99Black nylon pan and tilt bracket kit for SG90 servo's. The kit includes black nylon parts and fixing screws to construct a pan and tlt bracket with the addition of two SG90 servo's. Applications include controlling position of a camera or sensors for robotics and radio control applications. For suitable servo's please see out SG-90 9g servo, item HCROBO0005.
£ 12.00Robotic Claw / Grabber
£ 12.00Improved design, please see notes.Suitable for use with our TowerPro MG946R Metal Gear Servo (HCROBO0009), this item comes as a kit and will need assembling. The servo is not included but can be found hereNotes:Other sellers are selling this item without the pillars...
£ 3.00Pan/Tilt Servo Mounting Bracket for MG946
£ 3.00Servo not includedDescription:A sturdy but light weight metal servo mounting bracket that will perfectly fit our MG946R (HCROBO0009) or many other similar servos. The bracket has many mounting points that allow you to securely attach the the servo to a surface or to additional brackets or servo arms to allow pan and tilt motion.
£ 1.89Ultrasonic Module Bracket
£ 1.89Excellent little bracket for easily attaching an Ultrasonic Module to your...
£ 1.50Smart Car Servo Bracket
£ 1.50Excellent little bracket for easily attaching a Servo on your smart car project. This bracket comes with screws and bolts needed for fixing...
£ 4.994 Channel Trace Module
£ 4.99Description This module is an infrared detection system for smart cars, robots and other automated mechanisms to provide a multi-purpose solution. The discreet infrared transmitter and receiver uses the LM339 voltage comparator as a core device in the control circuit. This system has a...
£ 1.69Bracket for IR infrared obstacle avoidance...
£ 1.69The perfect accompaniment to our IR infrared avoidance sensor. This bracket has two screw holes and comes with screws and nuts to securely fix it to your project. Ideal for mounting obstacle avoidance sensor to our smart cars (HCROBO0003 and HCROBO0002).
£ 18.994 Wheeled Robot Smart Car Chassis Kit DC...
£ 18.99Four wheel drive smart car chassis kit. Very easy to construct, just add micro-controller (such as Arduino), and sensor modules to build a fully autonomous robot.
£ 9.99Smart Robot Car Chassis Kit with Speed...
£ 9.99Mechanical structure is simple and very easy to construct.