A 10 way jumper cable set with 2 standard pitch female connector strips at either end. This pack also includes two PCB mount 10 way male sockets and so provides a very low cost flexible way of interconnecting power and signals from one PCB to another...

This adapter board is designed specifically for the ESP8266 ESP-07, ESP-08 and ESP-12 2.4GHz WiFi modules. It provides an easy way to break-out the individual pins on these modules to a standard 0.1" pitch set of headers, which are also supplied with the adapter. The adapter has a set of tinned pads which are perfectly positioned so that your ESP module can be soldered on to the adapter...

A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. There are four versions currently available. Please see full description below.

This prototyping/programming board is designed for use with the Atmel ATMega48P, ATMega168P, & ATmega328P microcontrollers. The board has a number of features including a 24x12 0.1" grid prototyping area specifically laid out to match the pin-out of these devices. Additional pads are also provided for...

A set of 8 pin headers for WeMos boards and shields. This pack consist of 2 x long pin (10mm) female headers, 2 x short pin (3.25mm) female headers, and 2 x 11mm male header pins.

Pins on all headers are standard 0.1" pitch.

These jumper cables have tinned ends and measure approximately 10cm in length. Their outer diameter is approximately 1.4mm. They have a max voltage of 200V and are available in both red and black.

These jumper cables have tinned ends and measure approximately 10cm in length. Their outer diameter is approximately 1.4mm. They have a max voltage of 200V and are available in both red and black. Sold in packs of 100.