A simple low cost development board for experimenting with Atmel's popular ATmega8A microcontroller. It can be powered from an external 5V power supply, or via a USB port using a mini USB cable (not supplied). The board also has a convenient ISP h...
A simple low cost development board for experimenting with Atmel's popular ATmega8A microcontroller. It can be powered from an external 5V power supply, or via a USB port using a mini USB cable (not supplied). The board also has a convenient ISP header which is compatible with most ISP programmers including our USBTinyISP [url=http://hobbycomponents.com/index.php/usbtinyisp-in-circuit-avr-atmel-programmer.html[/url](HCARDU0002).
1.Microcontroller chip：ATmega8
2.MiniUSB interface or pin power supply, on-board AMS1117-3.3 chip, jumper sets supply voltage to 3.3V or 5V.
3.On-board crystal oscillator, external crystal with 8M by default.
4.All the IO port are leaded out and marked.
5.On-board ISP interface.
6.Reliable reset circuit.
7.AD converter reference voltage with filter inductor and capacitor.
Software and example code available on our support forum here.
This USBTinyISP programmer is ideally suited for in circuit programming of AVR devices or for...
A simple low cost development board for experimenting with Atmel's popular ATmega8A microcontroller. It can be powered from an external 5V power supply, or via a USB port using a mini USB cable (not supplied). The board also has a convenient ISP h...