Pack of 10 - 3 Pin 5.0mm...
- Color: Blue
- Material: Nylon PP6
- Rated voltage: 300V
- Rated current:...
£2.39
2.0mm Pin Headers – Right Angled
£0.29
£0.49
VAT included
2.0mm pitch pin headers in breakable 40 way strips.
Please note: If you require headers for standard 0.1" pitch (2.54mm) prototyping breadboards or PCB's then please see item HCCNIC0022.
2.0mm pitch pin headers in breakable 40 way strips.
Please note: If you require headers for standard 0.1" pitch (2.54mm) prototyping breadboards or PCB's then please see item HCCNIC0022.
Product Code:HCCNIC0029
Pin Pitch: 2.0mm
Type: Male
Solder Type: DIP
Connectors per strip: 40
Pin diameter: 0.6mm (approx)
Contact Type: Right Angled
HCCNIC0029
122 Items
Specific References
16 other products in the category
4 Pin 11mm Female Header...
These standard 2.54 Pitch headers are available in 4, 6, 8 and 10 way. Pins measure between 11...
£0.39
40 Pin 2.54mm 20mm Long...
An extended version of our standard 2.54mm / 0.1" pitch header pins (HCCNIC0018). Provided in...
£0.80
Single Row 40-Pin 2.54mm...
Single row, 40 pins, 2.54mm pitch; Current rate: 1AMP, insulation resistance: 1000mohm (max),...
£16.99
310 piece Dupont Bundle
This kit is comprised of various dupont housings and pins and is excellent for electronics...
£6.99
3.5mm Jack Socket PJ-3004A2
Temperature: -30~70oC
Rated Load: DC 30V 0.5A
Contact Resistance: <0.03 ohm
£0.99
0.1" 2.54mm 40way SIL...
Pack of 5 high quality tin plated turned pin SIL headers in breakable 40 way male to female...
£2.49
8 Pin Right Angled Header
These right angled headers are available in 6 and 8 pin versions.
Pin Spacing: 0.1...
£0.49
6-Pin 2.54mm pitch BZ...
A 6 pin BZ through hole connecter (B6B-ZR). This connector is the same type used on our PIC...
£0.49
PCB Project Prototyping kit
This kits contains a selection of useful components and consumables aimed at allowing you to...
£15.49
R/A 40 way 0.1" breakable...
A 40 way strip of male pin headers. These can be broken into smaller pieces to match whatever...
£0.69
- Currently Out of Stock
10 Pin 2.54mm Extended Pin...
These 2.54 Pitch headers are available in 6, 8 and 10 way and the pins measure approximately...
£0.49
40 way 2.0mm pitch straight...
2.0mm pitch male to male pin headers in breakable 40 way strips.
Please...
£0.40
2.0mm pitch pin headers in breakable 40 way strips.
Please note: If you require headers for standard 0.1" pitch (2.54mm) prototyping breadboards or PCB's then please see item HCCNIC0022.