74HC595 8 bit Serial Shift...
Contains 5 74HC595 8 bit Serial Shift Register (DIP 16) ICs.
Datasheet is available on...
The DM13A is a constant-current sink driver specifically designed for LED display applications. The device incorporates shift registers, data latches and constant current circuitry on the silicon CMOS chip. The maximum output current value of all 16 channels is adjustable by a single external resistor.
The DM13A is a constant-current sink driver specifically designed for LED display applications. The device incorporates shift registers, data latches and constant current circuitry on the silicon CMOS chip. The maximum output current value of all 16 channels is adjustable by a single external resistor.
Features
Minimum constant-current outputs: 0.3mA
Low minimum output voltage: 0.31V @ 0.4mA
Maximum output voltage: 5.5V
Maximum clock frequency: 25MHz
Power supply voltage: 3.3V to 5V
Overshooting stress elimination
Ghost elimination
In-rush current control
Pinout
Contains 5 74HC595 8 bit Serial Shift Register (DIP 16) ICs.
Datasheet is available on...
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP...
The MAX7219 is a compact, serial input/output common-cathode display drivers that interfaces...
The 74HC238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually...
The ATMega328 is the chip used in Arduino Uno development boards and is pre-programmed with...
The L293D is a quadruple high-current half-H driver. The L293D is designed to provide...
The DS18B20 Digital Thermometer in a small 3 pin TO-92 package. It provides 9 to 12-bit...
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
The AT28C64B-15PU is a high performance 64K (8K x 8bit) parallel EEPROM device in 28 pin DIP....
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...