0.3 Inch DIL IC Socket 24 Pin
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
The L9110H is a compact 8 pin DIL integrated device designed to directly to control and drive a DC motor. It has two TTL / CMOS compatible digital inputs that allow for full control of the motor in both directions. The control pins can be directly connected to most microcontrollers and with the use of PWM full speed control in both direction can be obtained. The internal H-bridge circuit has two output terminals which can directly drive a DC motor without the need for additional components. It has a relatively large current driving capability and its low output saturation voltage with built-in clamp diode reduces the impact of the current surges when switch power to the motor. L9110 is widely used in robotic cars, as part of a stepper motor driver, and for switching power LED devices.
Datasheet available on our support forum here.
Features
Low quiescent current;
Wide supply voltage range: 2.5V-12V
800mA continuous current output capability per channel
Lower saturation voltage
TTL / CMOS output level compatible, and can be directly connected to the CPU
Output built-in clamp diodes for inductive load
Integrated control and drive into a monolithic IC
High-voltage protection function
Operating temperature: 0 ℃ -80 ℃.
Pinout
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
The MAX7219 is a compact, serial input/output common-cathode display drivers that interfaces...
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
The L293D is a quadruple high-current half-H driver. The L293D is designed to provide...
The SN74HC377N is an octal positive-edge-triggered D-type Flip-flop with clock enable. It is...
This SN74HC245 octal Bus Transceiver IC is available in a DIL-20 package. A part of the 74HC...
The 74HC238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually...
The SN74HC139N is a 2-to-4 dual Decoder/Demultiplexer designed for high-performance...
This SN74HC86N quadruple XOR gate IC is available in a DIL-14 package. A part of the 74HC...
This Texas Instruments 74HC Quadruple 2 input AND gate IC is available in a DIL-16 package. A...
The DM13A is a constant-current sink driver specifically designed for LED display...
The CD74HC30E is a high speed CMOS logic 8-input NAND Gate. The device provides the system...
The ATMega328 is the chip used in Arduino Uno development boards and is pre-programmed with...