5mm Green LED
Standard high quality 5mm LED in a coloured package. Suitable for power and status indicators,...
We will be closed on Friday 29th March to Monday 1st April for a public holiday here in the UK. Any orders placed during these days will be dispatched on Tuesday 2nd April. We apologise for any inconvenience and wish you all a Happy Easter.
A small illuminated capacitive toggle switch. This touch sensitive switch will toggle between its on and off state each time its front panel is touched (note that the switch can be modified to operate as a momentary switch - see note below). When in the on state the switch will illuminate via an LED backlight changing the switch from the opaque white to one of 4 colours (red, yellow, green or...
A small illuminated capacitive toggle switch. This touch sensitive switch will toggle between its on and off state each time its front panel is touched (note that the switch can be modified to operate as a momentary switch - see note below). When in the on state the switch will illuminate via an LED backlight changing the switch from the opaque white to one of 4 colours (red, yellow, green or blue depending on version). It has a single digital output of either 0V when the switch is in the off state or 3.3V when in the on state, making it suitable for directly interfacing to a digital pin of either a 3.3V or 5V microcontroller. The switch can be powered by a single supply ranging from between 3.3 and 5.5V. Because the switch uses capacitive sensing it will also work when placed behind some materials, such as glass or acrylic perspex up to 3mm in depth.
Specification:
Product code: HCSWIT0063 (red), HCSWIT0064 (green), HCSWIT0065 (blue), HCSWIT0066 (yellow)
Supply voltage: 3.3V to 5.5V
Supply current (off state): 0.65mA
Supply current (on state): 7.3mA
Output voltage: 0V (off) 3.3V (on)
Dimensions in connector: 16mm x 20.5mm x 12mm
Momentary mode modification:
The switches mode of operation can be changed from toggle to momentary by shorting out the pads shown in the image below. This can be done by either bridging the pads with a small amount of solder or soldering a surface mount 0 ohm resistor onto the pads. Please note that this modification should only be attempted if you have some soldering experience.
Standard high quality 5mm LED in a coloured package. Suitable for power and status indicators,...
The 1838B is a miniaturised infrared receiver for remote control and other applications...
Bundle of 0603 SMD LEDs containing 20 each of the following colours:
Red, Yellow,...
There is a manual in our support forum containing example setup, dimensions, pinout and other...
The 17-21 SMD LED is much smaller than lead frame type components, thus enable smaller board...
This kits contains a selection of useful components and consumables aimed at allowing you to...
Package in 8mm tape as a set of 50.
Compatible with automatic placement equipment....
Standard high quality 5mm LED in a coloured package. Suitable for power and status indicators,...
A flexible full colour RGB LED light strip (HCOPTO0028). Each LED within the strip can be...
Package in 8mm tape as a set of 50.
Compatible with automatic placement equipment.
Standard high quality 3mm LED (HCOPTO0047) in a white diffused...
The TCRT5000L is a reflective sensor which includes an infrared emitter and photo transistor...
Standard high quality 5mm LED in a coloured package. Suitable for power and status indicators,...