Christmas Closure
We will be closed from 24th December to 3rd January. However we will be dispatching orders throughout this period when the postal service is in operation.
We would like to wish all our customers, old and new, a very merry Christmas.
Yodel
Please note: Yodel is currently experiencing issues. Whilst the issue is ongoing, orders placed using this service will be dispatched via Evri or Royal Mail 48 hour service.
4x4x4 V2 LED Cube Kit (Blue)
£11.99
VAT included
LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own 64 LED cube. The kit has been specifically designed to be easy to build and includes only through-hole components so that even someone with basic soldering skills, a soldering iron and a few simple tools can build it. It comes pre-flashed with 13 animations so is ready to go as soon as its all been soldered together
For Arduino users this kit is also Arduino compatible and together with our free Arduino library you can write and upload your own cube animations (requires the Arduino IDE and a USB to serial adapter to upload sketches).
LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own 64 LED cube. The kit has been specifically designed to be easy to build and includes only through-hole components so that even someone with basic soldering skills, a soldering iron and a few simple tools can build it. It comes pre-flashed with 13 animations so is ready to go as soon as its all been soldered together
For Arduino users this kit is also Arduino compatible and together with our free Arduino library you can write and upload your own cube animations (requires the Arduino IDE and a USB to serial adapter to upload sketches).
This is version 2 of the kit that includes the following changes:
* Much bigger measuring 83x83x110mm when fully built
* DC socket with USB to DC Jack cable replaces serial cable for powering directly from a 5V USB adapter
* ICs are now socketed
* Bigger PCB with more spacing between components to easier construction
* Optional LED template PCB to make constructing the LED cube easier
* Now available with cube LEDs in blue, red, white, green, and pink
* Base LEDs are now controllable
The kit is available with 5 different LED colour versions:
64 x 3mm BLUE LEDs (HCKITS0070)
64 x 3mm WHITE LEDs (HCKITS0071)
64 x 3mm RED LEDs (HCKITS0072)
64 x 3mm GREEN LEDs (HCKITS0073)
64 x 3mm PINK LEDs (HCKITS074)
What you get in the kit:
| QTY | Description |
| 1 | Version 2 4x4x4 Cube Kit PCB |
| 16 | 180 Ohm resistors (BRN, GRY, BLK, BLK, BRN) |
| 4 | 220 Ohm resistors (RED, RED, BLK, BLK, BRN) |
| 1 | 10K Ohm resistor (BRN, BLK, BLK, RED, BRN) |
| 3 | 100nF ceramic capacitor (marked 104) |
| 1 | 470nF ceramic capacitor (marked 474) |
| 1 | SR1100 Diode |
| 1 | 28 pin IC socket |
| 1 | 18 pin IC socket |
| 1 | ULN2003 18 pin IC |
| 1 | ATMega328 28 pin IC |
| 1 | Push button |
| 1 | 2.1mm DC socket |
| 1 | 5 Pin right-angled header (may be supplied as a 40 pin breakable strip) |
| 20 + Spares | Male to female sockets (supplied as a 40 pin breakable strip) |
| 4 | 5mm white LEDs |
| 64 + Spares | 3mm LEDs |
| 25cm | Solid core wire |
| 1 | USB to 2.1mm DC cable |
Required items (not included in the kit)
A soldering iron + solder
A small pair of snips or side cutters for trimming component leads
A 5V USB adaptor for powering the cube (500mA or greater)
Recommended items (not included in the kit)
A pair of long nose pliers for bending LED legs
Version 2 4x4x4 cube template PCB (HCPROT0101) (You can add this to your order by selecting "Add Template PCB" above.
BUILD GUIDE IS AVAILABLE ON OUR SUPPORT FORUM HERE.
LIBRARY IS AVAILABLE ON OUR SUPPORT FORUM HERE.
HCKITS0070
170 Items
Specific References
LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own 64 LED cube. The kit has been specifically designed to be easy to build and includes only through-hole components so that even someone with basic soldering skills, a soldering iron and a few simple tools can build it. It comes pre-flashed with 13 animations so is ready to go as soon as its all been soldered together
For Arduino users this kit is also Arduino compatible and together with our free Arduino library you can write and upload your own cube animations (requires the Arduino IDE and a USB to serial adapter to upload sketches).