Wemos Triple Base
The Wemos triple base (HCWEMO0016) is designed to allow a Wemos shield to be connected to a...
Due to current issues with Yodel, any orders placed
with Yodel selected will be shipped by Evri for the time being.
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
Features
- Charging Voltage: max: 10V, recommend: 5V
- Charging Current: max: 1A
- Lithium Battery voltage: 3.3-4.2V
- Boost Power Supply: 5V(max: 1A)
Pins
D1 mini Shield 5V Power Supply, 5V(max: 1A) GND GND Ports
PH2-2.0MM (Port 1) Connect to lithium Battery (normal 3.3-4.2V) Micro USB (Port 2) Charging port (normal 5V) Green LED lights when charging is completed Red LED lights when charging J1 setting max charging current, 0.5A or 1A. J2 Connect battery to A0 Downloads
Additional information including drivers, guides, schematics, libraries and example sketches can be fond on the forums product page here
The Wemos triple base (HCWEMO0016) is designed to allow a Wemos shield to be connected to a...
The WeMos WS2812B RGB Shield is a digital full colour (16777216 colour) RGB LED light source....
The Wemos dual base (HCWEMO0015) is designed to allow a Wemos shield to be connected to a...
A set of 8 pin headers for WeMos boards and shields. This pack consist of 2 x long pin (10mm)...
The DHT Shield is a digital temperature and humidity sensor utilising the DHT11 sensor....
The WeMos Mini D1 OLED shield is a tiny 0.66" 64 x 48 pixel OLED display. Using OLED display...
This relay shield is designed to be used with the WeMos mini & mini Pro ESP8266 based...
This prototyping shield is designed for use with the WeMos D1 mini and mini Pro development...