3D Printing

  

Active filters

  • 7mm Drag Chain

    £4.99

    This 7mm drag chain helps to maintain the life of wires used in numerous machines, including (but not limited to) CNC machines and 3D printers. The drag chains house wires/cables to stop them snagging on other parts of the machine. This drag chain is 7mm and comes as a 1 meter length.

    Last items in stock
  • 10mm Drag Chain

    £5.83

    This 10mm drag chain helps to maintain the life of wires used in numerous machines, including (but not limited to) CNC machines and 3D printers. The drag chains house wires/cables to stop them snagging on other parts of the machine. This drag chain is 10mm and comes as a 1 meter length.

    Product Code: HC3DPR0035

    Last items in stock
  • 26 Tooth Extruder Gear

    £0.83

    This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a 5mm inner hole. The toothed section of the gear measures approximately 7mm, and the bottom part (non-toothed) measures approximately 4mm so total overall length is 11mm approx.

    Product Code: HC3DPR0027

    In-Stock!
  • 40 Tooth Extruder Gear

    £0.83

    This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a 5mm inner hole. The toothed section of the gear measures approximately 7mm, and the bottom part (non-toothed) measures approximately 4mm so total overall length is 11mm approx.

    Product Code: HC3DPR0028

    In-Stock!
  • 100K Thermistor with Cable

    £1.24

    A thermistor is a type of resistor whose resistance varies significantly with temperature, more so than in standard resistors. These 100k thermistors are ideal for 3D printing applications and come with connection cables already attached.

    In-Stock!
  • PLA Filament for 3D...

    £12.49

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

    Last items in stock
  • MK7/MK8 Heatsink (Black)

    £1.66

    This extruder heatsink measures 40mm x 40mm and is 11mm deep. The centre hole is approximately 12mm in diameter.

    Product Code: HC3DPR0033

    Last items in stock
  • MK2B Dual Power Heatbed,...

    £5.41

    This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources (these are soldered for use as a 12V PCB). It has a central mounting hole on the front side to allow for three point mounting...

    Out-of-Stock
  • 42 Stepper Motor Bracket

    £2.91

    42 Stepper Motor Bracket to house the extruder motor for 3D printers. The “L” shaped bracket measures approximately 50mm x 50mm x 5mm. The diameter of the inner hole (for the motor shaft) measures approximately 22mm.

    Product Code: HC3DPR0029

    Last items in stock
  • 40mm x 40mm Brushless DC Fan

    £1.66

    This 40mm x 40mm fan has a height of 10mm. The rated voltage is 5V with a startup of 2.8V. Full dimensions can be seen below.

    Last items in stock
  • High quality 12V / 40W...

    £2.49

    A 40W heater cartridge suitable for 3D printers (e.g. Reprap Mendel Prusa) with a 12V supply. Heater cartridge is made from stainless steel and has 1M length of silicone insulated cable.

    Last items in stock
  • Dual Delrin V wheel

    £2.08

    High tolerance dual V wheels great for use with V wheel linear guide systems. Its double V shape design makes it compatible with V-Slot™ linear rail and OpenRail™ systems. 

    Last items in stock