2.1mm DC Power Male Plug Connector
Plastic + metal male 2.1mm (inner diameter) DC power plug with solider connections.
Plastic + metal male 2.1mm (inner diameter) DC power plug with solider connections. Suitable for use with various DC power sockets and DIY projects. Also can be used with various Arduino boards such as Uno, Mega, etc.
Size:1.69 in x 0.39 in x 0.39 in (4.3 cm x 1.0 cm x 1.0 cm)
Specific References
16 other products in the category
8 Pin Right Angled Header
These right angled headers are available in 6 and 8 pin versions.
Pin Spacing: 0.1...
36 Way Double Pin Header (2...
This pin header has a standard pitch of 2.54mm. Overall height is 19.5mm with the pins being...
PCB Project Prototyping kit
This kits contains a selection of useful components and consumables aimed at allowing you to...
- Currently Out of Stock
10 Pin 2.54mm Extended Pin...
These 2.54 Pitch headers are available in 6, 8 and 10 way and the pins measure approximately...
Single Row 40-Pin 2.54mm...
Single row, 40 pins, 2.54mm pitch; Current rate: 1AMP, insulation resistance: 1000mohm (max),...
40 Pin 2.54mm 20mm Long...
An extended version of our standard 2.54mm / 0.1" pitch header pins (HCCNIC0018). Provided in...
40 way 2.0mm pitch straight...
2.0mm pitch male to male pin headers in breakable 40 way strips.
Please...
2.1mm DC power socket
PCB mountable DC power socket with a commonly used 2.1mm diameter centre pin.
0.1" 2.54mm 40way SIL...
Pack of 5 high quality gold plated turned pin SIL headers in breakable 40 way male to male...
2.0mm Pin Headers – Right...
2.0mm pitch pin headers in breakable 40 way strips.
Please note: If you require...
6-Pin 2.54mm pitch BZ...
A 6 pin BZ through hole connecter (B6B-ZR). This connector is the same type used on our PIC...
3.5mm Jack Socket PJ-3004A2
Temperature: -30~70oC
Rated Load: DC 30V 0.5A
Contact Resistance: <0.03 ohm