This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS compatible shield (HC3DPR0002). Using this module allows you to print your designes without requiring a computer be connected to your printer. The module contains and 20 x 4 line backlit LCD display, buzzer, SD card reader, and control inputs. The module also includes cables and adapter board for...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS compatible shield (HC3DPR0002). Using this module allows you to print your designes without requiring a computer be connected to your printer. The module contains and 20 x 4 line backlit LCD display, buzzer, SD card reader, and control inputs. The module also includes cables and adapter board for solder-less connection to a RAMPS shield. Power is taken directly from the RAMPS shield so no additional cabling is required.
Although this module is designed to be used with a RAMPS shield and 3D printer, it can of course be used for any project where a panel mounted display and control input is required. An Arduino test sketch is available which will demonstrate how to use the module in your own projects.
Schematics and test sketch available on our support forum here.
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a...
Excellent for 3D printer heatbeds, this leveling screw set comprises M3 leveling screw...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
A 40W heater cartridge suitable for 3D printers (e.g. Reprap Mendel Prusa) with a 24V supply....
This 40mm x 40mm fan has a height of 10mm. The rated voltage is 5V with a startup of 2.8V....
A thermistor is a type of resistor whose resistance varies significantly with temperature,...
This module is based upon the HR4988 stepper motor driver and is ideal for use in 3D printer,...
A thermistor is a type of resistor whose resistance varies significantly with temperature,...
These mechanical end stops are quiet simply a means to an end. They detect when an x/y/z stage...
3d printer MK7 compatible stainless steel extrusion gear for 1.75mm filament. Includes grub...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
This 10mm drag chain helps to maintain the life of wires used in numerous machines, including...
Optical endstop providing a contactless and reliable alternative to the mechanical...
This extruder heatsink measures 40mm x 40mm and is 11mm deep. The centre hole is approximately...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS compatible shield (HC3DPR0002). Using this module allows you to print your designes without requiring a computer be connected to your printer. The module contains and 20 x 4 line backlit LCD display, buzzer, SD card reader, and control inputs. The module also includes cables and adapter board for...
