100k Thermistor
A thermistor is a type of resistor whose resistance varies significantly with temperature,...
£0.89
42 Stepper Motor Bracket
£3.49
VAT included
42 Stepper Motor Bracket to house the extruder motor for 3D printers. The “L” shaped bracket measures approximately 50mm x 50mm x 5mm. The diameter of the inner hole (for the motor shaft) measures approximately 22mm.
Product Code: HC3DPR0029
42 Stepper Motor Bracket to house the extruder motor for 3D printers. The “L” shaped bracket measures approximately 50mm x 50mm x 5mm. The diameter of the inner hole (for the motor shaft) measures approximately 22mm.
Product Code: HC3DPR0029
HC3DPR0029
8 Items
Specific References
16 other products in the category
V5 MK7 / MK8 Compatible 3D...
Designed for many common types of 3D printers such as Makerbot MK7/MK8, Prusa i3 etc. Solid...
£1.49
M3 Levelling Screw Set
Excellent for 3D printer heatbeds, this leveling screw set comprises M3 leveling screw...
£0.99
26 Tooth Extruder Gear
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a...
£0.99
10mm Drag Chain
This 10mm drag chain helps to maintain the life of wires used in numerous machines, including...
£6.99
RepRap Mega Pololu...
RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire...
£4.99
- Currently Out of Stock
V1.2 Mechanical End stop...
These mechanical end stops are quiet simply a means to an end. They detect when an x/y/z stage...
£1.49
Smooth idler pulley kit
This kit contains all the parts necessary to construct a single idler free wheel pulley which...
£4.49
70CM Female to Female...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
£1.59
40mm x 40mm Brushless DC Fan
This 40mm x 40mm fan has a height of 10mm. The rated voltage is 5V with a startup of 2.8V....
£1.99
70CM Female to Female...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
£1.58
40 Tooth Extruder Gear
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a...
£0.99
- Currently Out of Stock
A4988 StepStick Compatible...
This module is based upon the Allegro A4988 stepper motor driver and is ideal for use in 3D...
£3.49
High quality 24V / 40W...
A 40W heater cartridge suitable for 3D printers (e.g. Reprap Mendel Prusa) with a 24V supply....
£2.99
42 Stepper Motor Bracket to house the extruder motor for 3D printers. The “L” shaped bracket measures approximately 50mm x 50mm x 5mm. The diameter of the inner hole (for the motor shaft) measures approximately 22mm.
Product Code: HC3DPR0029