LM35DZ TO-92 LM35 Precision Temperature Sensor
The LM35 series are precision integrated-circuit temperature sensors, with an output voltage linearly proportional to the Centigrade temperature. Thus the LM35D has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant voltage from the output...
The LM35 series are precision integrated-circuit temperature sensors, with an output voltage linearly proportional to the Centigrade temperature. Thus the LM35D has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35D does not require any external calibration or trimming. Low cost is assured by trimming and calibration at the wafer level. The low output impedance, linear output, and precise inherent calibration of the LM35D make interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 draws only 60 μA from the supply, it has very low self-heating of less than 0.1°C in still air. The LM35D is rated to operate over a 0°C to +100°C temperature range.
Features:
• Calibrated Directly in ° Celsius (Centigrade)
• Linear + 10 mV/°C Scale Factor
• 0.5°C Ensured Accuracy (at +25°C)
• Suitable for Remote Applications
• Low Cost Due to Wafer-Level Trimming
• Operates from 4 to 30 V
• Less than 60-μA Current Drain
• Low Self-Heating, 0.08°C in Still Air
• Nonlinearity Only ±¼°C Typical
• Low Impedance Output, 0.1 Ω for 1 mA Load
Example Arduino Sketch, diagram and Datasheet available on our support forum here.
Specific References
16 other products in the category
Black, 40 Pin ZIF Socket
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
Black, 28 Pin ZIF Socket
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
SN74HC377N Flip-Flop
The SN74HC377N is an octal positive-edge-triggered D-type Flip-flop with clock enable. It is...
SN74HC02N Logic Quad 2...
The Texas Instruments 74HC02N Quad 2-input NOR gate is available in a DIL-14 package. It has...
L293D 16 Pin DIP IC
The L293D is a quadruple high-current half-H driver. The L293D is designed to provide...
DALLAS DS18B20 TO-92 IC
The DS18B20 Digital Thermometer in a small 3 pin TO-92 package. It provides 9 to 12-bit...
- Currently Out of Stock
0.3 Inch DIL IC Socket 24 Pin
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
74HC08B1R Quad 2-input...
This Texas Instruments 74HC Quadruple 2 input AND gate IC is available in a DIL-16 package. A...
0.3 Inch DIL IC Sockets 18 Pin
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
Green 40 Pin ZIF Socket
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
SN74HC86N Quad Exclusive OR...
This SN74HC86N quadruple XOR gate IC is available in a DIL-14 package. A part of the 74HC...
0.3 Inch DIL IC Socket 20...
Number of Pins: 20
Socket Type: DIL 0.3 Inch
Contact Plating: Tin