PT333B 5mm Infrared Photo...
The PT333 series (HCOPTO0063) consists of a NPN silicon photo transistor encapsulated in a...
Our phone lines are currently down due to issues causing during the recent flooding. If you need to contact us please email sales@hobbycomponents.com
This 8x8 serial dot matrix LED module (HCOPTO0014) allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 serial matrix LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents....
This 8x8 serial dot matrix LED module (HCOPTO0014) allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 serial matrix LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents. What's more, the modules can be daisy-chained to make larger LED displays whilst still only requiring 3 digital control pins. The PCB has no overhang on the sides of the matrix module so modules can be positioned side by side with no gaps to make one continuous display.
To make controlling this display from an Arduino as simple as possible we have also created an exclusive library which will allow you to display text and numbers and even create a scrolling message display.
Item includes:
Pre-soldered serial dot matrix module with an 8x8 red led module.
5 way female to female Dupont cable for interconnecting multiple displays.
Working voltage: 5V
Dimensions: 5 cm x 3.2 cm wide x 1.5 cm high
4 fixing screw holes measuring 3 mm
Input and output interface, support for multiple module cascade
Pinout | ||
Pin | Input | Output |
1 | VCC (5V) | VCC |
2 | GND | GND |
3 | DIN | DOUT |
4 | CS | CS |
5 | CLK | CLK |
Example sketch, datasheet and exclusive library available from our support forum here.
Also, check out our blog post "Library for MX7219 LED Driver".
The PT333 series (HCOPTO0063) consists of a NPN silicon photo transistor encapsulated in a...
Standard high quality 3mm LED in a coloured package. Suitable for power and status indicators,...
Standard high quality 5mm LED in a coloured package. Suitable for power and status indicators,...
The TCRT5000L is a reflective sensor which includes an infrared emitter and photo transistor...
Available in several colours, these 5V tolerant LEDs are an excellent addition to any...
Package in 8mm tape as a set of 50.
Compatible with automatic placement equipment....
Standard high quality 3mm LED in a coloured package. Suitable for power and status indicators,...
There is a manual in our support forum containing example setup, dimensions, pinout and other...
This kit comprises 5 each of the following values:
LXD5506 / LXD5516 /LXD5528/LXD5649 /...
Standard high quality 5mm LED in a coloured package. Suitable for power and status indicators,...
Pack of 10 5mm RGB LEDs (Common Cathode).
Forward Voltage
R: 1.9 - 2.2
G:...
The MAX7219 is a compact, serial input/output common-cathode display drivers that interfaces...