Acrylic Prototyping Platform for R3 Uno
This clear acrylic platform is excellent for keeping your Uno and Breadboard in place whilst you work on it. The platform has mounting holes for the Uno R3 and comes with relevant screws and mounting pads for the underside. You then simply peel off the backing of your breadboard (sold separately (HCPROT0025) or if purchasing the kit, comes with it (HCKITS0040)) and fix it in place...
This clear acrylic platform is excellent for keeping your Uno and Breadboard in place whilst you work on it. The platform has mounting holes for the Uno R3 and comes with relevant screws and mounting pads for the underside. You then simply peel off the backing of your breadboard (sold separately (HCPROT0025) or if purchasing the kit, comes with it (HCKITS0040)) and fix it in place.
Platform measures approximately 12cm x 8.3m
Acrylic Platform
4 x Nylon M3 Screws
4 x Nylon M3 Stand-offs
4x Nylon M3 Nuts
4 x Gel Pads
Product Code: HCPROT0052
This platform is also sold as a kit, which contains the Uno, platform, bundle of 65 jumper cables in assorted sizes and colours, breadboard and all screws and gel pads. The product code for this is HCKITS0040.
Specific References
16 other products in the category
80 x 80mm Strip board
A prototyping strip board (HCPROT0064) measuring 80mm x 80mm. It has a grid of 31 x 31 1mm...
Double Sided Prototping PCB...
Double-sided prototyping board (HCPROT0065) measuring 60mm x 40mm. Made from 1.6mm glass fiber...
10cm Tinned Jumper Cable...
These jumper cables have tinned ends and measure approximately 10cm in length. Their outer...
IC Strip Board
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. There...
- Currently Out of Stock
Hobby Components Target /...
This prototyping/programming board is designed for use with the Atmel ATMega48P, ATMega168P,...
EDTracker DIY PCB
This is the latest Revision 3 PCB which allows you to simplify your build of a DIY EDTracker -...
SMD QFP / TQFP / LQFP...
Double-sided FR-4 (glass fiber) with a unique design making it compatible with most types of...
Prototyping adapter for...
This adapter board is designed specifically for the ESP8266 ESP-07, ESP-08 and ESP-12 2.4GHz...
WeMos Header Pin Set
A set of 8 pin headers for WeMos boards and shields. This pack consist of 2 x long pin (10mm)...
"Red Wings" 3.3V / 5V Power...
- Input voltage: 6.5~12V or USB
- Output voltage: 3.3V / 5V
- Max Output current:...
5x5 Mini breadboards in...
These tiny breadboards are not only fun but also have a particle side for prototyping...