IC Strip Board
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. There are four versions currently available. Please see full description below.
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 25mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.5mm. This board has 392 pads for IC pins, each one has the measurements 5mm x 0.3mm. These are divided into two 196 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 25mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.65mm. This board has 308 pads for IC pins, each one has the measurements 5mm x 0.3mm. These are divided into two 154 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 20mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.95mm. This board has 208 pads for IC pins, each one has the measurements 5mm x 0.4mm. These are divided into two 104 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.
A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 20mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 1.27mm. This board has 156 pads for IC pins, each one has the measurements 5mm x 0.5mm. These are divided into two 78 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.
Specific References
16 other products in the category
EDTracker DIY PCB
This is the latest Revision 3 PCB which allows you to simplify your build of a DIY EDTracker -...
Acrylic Prototyping...
This clear acrylic platform is excellent for keeping your Uno and Breadboard in place whilst...
10cm Tinned Jumper Cable...
These jumper cables have tinned ends and measure approximately 10cm in length. Their outer...
10cm Tinned Jumper Cable...
These jumper cables have tinned ends and measure approximately 10cm in length. Their outer...
Prototyping Shield PCB Board
PCB used for Arduino UNO Prototyping, Soldering and assembly required, great DIY part
SMD QFP / TQFP / LQFP...
Double-sided FR-4 (glass fiber) with a unique design making it compatible with most types of...
Solderless 400 Point...
Solderless breadboard with 400 tie points
Self-adhesive backing for easy mounting