Hobby Components USB 8CH...
Our hugely popular low cost 8 channel analyser (HCTEST0006) is designed to work with the...
These test hook clips measure approximately 5x1.5cm. They use a miniature sprung claw system and are capable of grabbing very small points, such as the legs of ICs/LEDs/Resistors etc., they are available in various colours. Removing the clips cap will reveal a solder-able tab allowing the clip to be soldered on to the end of a test lead.
Our hugely popular low cost 8 channel analyser (HCTEST0006) is designed to work with the...
Set of ten high quality test clips attached to a ten way female DuPont cable....
These small test hook clips contain strong spring pulling mini hooks, which enable you to...
Insulated PCB mount 4mm Banana socket - side stackable 4mm Angled Socket.
Material:...
4 digit 0.36" LED digital display with reverse polarity, a refresh rate of 500ms and an...
Our hugely popular low cost 8 channel analyser (HCTEST0006) is...
A set of gold plated sprun test pins (pogo). Suitable for pcb test or momentary contact...
The Hobby Components logic analyser can capture up to 16 separate channels of 3.3V or 5V logic...
4 digit 0.36" LED digital display with reverse polarity, a refresh rate of 500ms and an...
Set of ten high quality test clips attached to a ten way female DuPont cable....
Insulated PCB mount 4mm Banana socket - side stackable 4mm Angled Socket.
Material:...
Pack of 10 pairs (male and female) 3.5mm gold plated bullet / banana connectors.
High quality silicone stackable electrical test lead (4mm Banana). Suitable for use with...
Our hugely popular low cost 8 channel analyser (HCTEST0006) is designed to work with he sigrok...
4 digit 0.36" LED digital display with reverse polarity, a refresh rate of 500ms and an...