Hobby Components SmartLCD...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
The Hobby Components logic analyser can capture up to 16 separate channels of 3.3V or 5V logic signals at a maximum sample rate of 12MS/s. Designed for use with the open source Sigrok PulseView and sigrok-cli software, this analyser is a complete low cost solution capable of capturing and decoding many popular types of serial and parallel protocols including I2C, SPI, UART, PWM, etc...
The Hobby Components logic analyser can capture up to 16 separate channels of 3.3V or 5V logic signals at a maximum sample rate of 12MS/s. Designed for use with the open source Sigrok PulseView and sigrok-cli software, this analyser is a complete low cost solution capable of capturing and decoding many popular types of serial and parallel protocols including I2C, SPI, UART, PWM, etc.
• 16 channels at up to 12MS/s*.
• Capture depth of up to 1T samples*
• Compatible with 3.3V & 5V logic levels.
• Compact design, no additional hardware required - just connect the analyser to your computer with supplied USB cable, install the software and you're ready to go.
• Compatible with Microsoft Windows 7, 8, 10 32/64 bit (other operating systems are supported).
• Works with Sigrok PulseView and sigrock-cli.
Package contents include:
1 x 16 channel logic analyser device
1 x USB cable
4 x Blue Test leads
4 x Green Test leads
4 x Yellow Test leads
4 x White Test leads
2 x Black Test leads
2 x Red Test leads
* Maximum capture rate and memory depth may depend on the specification and performance of your computer system. An internet connection is required for software download.
PulseView and sigrok-cli is a separate open source cross-platform project developed by the Sigrok team. Latest builds of the software and more information about the project can be found by visiting the official Sigrok website sigrok.org.
Sigrock PulseView Software:
Real Time Clock Example:
ARM ETMv3 Example:
EEPROM Example:
Z80 Example:
Windows Users:
Sigrok software:
The latest version of the Sigrok software can be downloaded from the official Sigrok website (sigrok.org). The latest Windows build of the PulseView (GUI) software can be downloaded here:
https://sigrok.org/wiki/Downloads
DRIVERS, ETC can be located on our support forum here.
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
Additional add-on for our V2 4x4x4 Cube Kits. This PCB template has been designed to make...
We've partnered up with the fabulous guys over at EDTracker to bring to you the EDTracker...
PLEASE NOTE THAT THIS KIT IS NOW SHIPPED WITH AN UNBRANDED UNO - Not the R3 Uno...
This robotic car kit is a complete kit of parts, including electronics, that will allow you to...
Our Ultimate Sensor Kit has been revamped, and, unlike most in the market, is mercury free! It...
The SmartRFy digital Tx module provides a set of 4 digital input pins which can be used to...
The SmartRFy USB module adds the ability to monitor and control a SmartRFy network directly...
Designed as a means to easily go from your Arduino and breadboard prototype to a more...