ESP-07 ESP8266 Serial Wifi...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
- Remote control with 21 buttons
- Transmission Frequency: 38KHz;
- Launch Distance: More than 8m (depending on the surrounding environment, sensitivity of receiver etc)
The Hobby Components IR Remote Control Kit has a transmission frequency of 38KHz and uses the NEC protocol. Depending on the surrounding environment, it has a launch distance of more than 8 meters with an effective angle of 60 degrees. The remote itself has 17 buttons and is powered by 1 CR2025 cell battery, which is included in the kit.
For Arduino users please checkout out exclusive library (HCIRNEC) and sketch on our support forum here:
https://forum.hobbycomponents.com/viewtopic.php?f=74&t=1461&p=3066
- Remote control with 21 buttons
- Transmission Frequency: 38KHz
- Protocol: NEC
- Launch Distance: More than 8m (depending on the surrounding environment, sensitivity of receiver etc)
- Effective Angle: 60 degrees
- Sticking Material: 0.125mm PET
- Static Current: 3~5uA, Dynamic Current: 3~5mA
- Remote control powered by 1 x CR2025 cell (included)
IR Receiver pinout:
1) GND
2) +5V
3) Signal out
Package contents:
- 1 x Remote controller
- 1 x IR receiver module
- 1 x LED
- 1 x Dupont cable
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
The Hobby Components wireless Bluetooth module is intended to be used in conjunction with our...
This item is a wireless remote controlled module with a battery operated transmitter fob. It...
The PT2272-M4 (Rx) receiver module is designed to be used in conjunction with the PT2262 (Tx)...
Low cost superheterodyne receiver and ASK transmitter. The transmitter consists of a single...
This class 2 Bluetooth module (HC-05) comes programmed with firmware that allows it to pass...
The PT2262 (Tx) transmitter module is designed to be used in conjunction with the PT2272-M4...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter...
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
Low cost superheterodyne receiver designed to be used with transmitter HCMODU0088. The...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter...