This shield (HCARDU0014) is designed for 5V Arduino boards that use the standard Arduino header layout such as the Uno, Leonardo, Mega, etc. It is compatible with the standard Arduino LiquidCrystal library which is built into the Arduino development environment (see our example sketches for correct configuration). The shield includes a 16 character by 2 line LCD display with exceptionally...
This shield (HCARDU0014) is designed for 5V Arduino boards that use the standard Arduino header layout such as the Uno, Leonardo, Mega, etc. It is compatible with the standard Arduino LiquidCrystal library which is built into the Arduino development environment (see our example sketches for correct configuration). The shield includes a 16 character by 2 line LCD display with exceptionally clear white text on a blue backlit background. Contrast can be adjusted by means of a multi-turn potentiometer. Six miniature push buttons (SELECT, LEFT, RIGHT, UP, DOWN & RST) provide a user input and only require one input pin to monitored their state. Additional interfaces include an ICSP header which can also double as an SPI interface and pads are provided to allow extra optional headers to be added.
Please note: This shield is designed for 5V Arduino boards such as the Uno, Leonardo, Mega, etc. It is not compatible with 3V Arduino boards.
Due to the way the backlight circuit works do not manually configure digital pin 10 as an high output when this shield is connected.
-
This is a 16x2 LCD Keypad module for ARDUINO Uno/Mega
- Blue Backlight with white text
- Uses standard 4 Bit Arduino LCD Library
Item: LCD Keypad Shield for Arduino Duemilanove & LCD 1602
Dimensions: 3.15 in x 2.28 in x 0.51 in (8.0 cm x 5.8 cm x 1.3 cm)
Example Arduino Code Available on our Support Forum here.
This adapter board shield (HCARDU0084) is intended to be used with our 2.4" TFT touch screen...
This adapter board shield (HCARDU0098) is intended to be used with our 3.2" TFT touch screen...
The Hobby Components prototyping shield for the Arduino Uno allows you to add your own custom...
The Hoby Components high power motor drive shield (MonsterMoto compatible) is based on the...
This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...
This shield is compatible with most types of Arduino boards that support the standard header...
The V2 Sensor Shield allows you to connect to various modules like sensors, servos, relays,...
This Arduino compatible screw shield allows for easy and more durable interfacing to your...
The Hobby Components breakout shield is a quick and low cost way to add extra pin access to...
A 4 channel relay shield (HCARDU0102) which conveniently and safely allows an Arduino to...
This shield (HCARDU0086) is designed to allow you to control a...
This Screw Shield is a terminal expansion board which can be stacked directly on the female...
This Ethernet Shield is based on the Wiznet W5100 Ethernet Chip and gives you an easy way to...
This feature rich 262K colour TFT module (HCARDU0083) has a resolution 320 x 240 pixels (QVGA)...
This shield (HCARDU0014) is designed for 5V Arduino boards that use the standard Arduino header layout such as the Uno, Leonardo, Mega, etc. It is compatible with the standard Arduino LiquidCrystal library which is built into the Arduino development environment (see our example sketches for correct configuration). The shield includes a 16 character by 2 line LCD display with exceptionally...
