LCD Keypad Shield for...
This shield (HCARDU0014) is designed for 5V Arduino boards that use the standard Arduino...
- Currently Out of Stock
A 4 channel relay shield (HCARDU0102) which conveniently and safely allows an Arduino to interface to the outside world via a set of relays. The shield will plug into an Arduino with standard headers and screw terminals for the relay contact means that no soldering is required. The relays can be individually controlled via 4 digital pins on your Arduino. An on board 5V regulator means that...
A 4 channel relay shield (HCARDU0102) which conveniently and safely allows an Arduino to interface to the outside world via a set of relays. The shield will plug into an Arduino with standard headers and screw terminals for the relay contact means that no soldering is required. The relays can be individually controlled via 4 digital pins on your Arduino. An on board 5V regulator means that the relays can be powered from a power supply with a wide 7 - 12V voltage range (9V ideal). Screw terminals or a standard DC connector allow for easy connection of the power supply.
Although this board is designed as an Arduino shield it can also be used stand alone. With the addition of our PT2262/PT2272 wireless modules the relays on this board can be controlled wirelessly without the need for a microcontroller. See items HCMODU0048 & HCMODU0049.
Please note: There is an screen print error on this shield, D0 = D7, D1 = D6, D2 = D5, D3 = D4.
Item Code: HCARDU0102
Power apply: 7V-12V(>200mA)
Relay Max Switching Voltage : 240VAC/60VDC
Relay Max switching current : 3A
Contact load capacity: 1A 250VAC, 3A 120VA/24VDC
Wireless interface: xbee/ Bluetooth Bee/ PT2262/72
Size: 8 x 5.5x 2.8cm
Example sketch available on our support forum here.
This shield (HCARDU0014) is designed for 5V Arduino boards that use the standard Arduino...
This feature rich 262K colour TFT module (HCARDU0083) has a resolution 320 x 240 pixels (QVGA)...
The Hoby Components high power motor drive shield (MonsterMoto compatible) is based on the...
This Screw Shield is a terminal expansion board which can be stacked directly on the female...
The Hobby Components prototyping shield for the Arduino Uno allows you to add your own custom...
2 interfaces for 5V Servo connected to Arduino's high-resolution dedicated...
This Ethernet Shield is based on the Wiznet W5100 Ethernet Chip and gives you an easy way to...
The Hobby Components breakout shield is a quick and low cost way to add extra pin access to...
This adapter board shield (HCARDU0098) is intended to be used with our 3.2" TFT touch screen...
This Arduino compatible screw shield allows for easy and more durable interfacing to your...
The Hobby Components prototyping shield for the Arduino Mega allows you to add your own custom...
This shield is compatible with most types of Arduino boards that support the standard header...
This data logger shield provides an Arduino Uno, Leonardo, or Mega with the ability to log...