Modules

  

  

  

Active filters

  • 5V 1 Channel 240V AC Solid...

    £2.91

    A single channel relay module (HCMODU0114) featuring an Omron G3MB-202P solid state relay. This module is capable of switching an AC voltage between 100 and 240V at up to a 2A current. The module can be controlled from 5V digital source such as an Arduino microcontroller. A resistive type fuse is provided on the module to help protect excessive current draw.

    Last items in stock
  • "Red Wings" 3.3V / 5V Power...

    £2.16

    - Input voltage: 6.5~12V or USB
    - Output voltage: 3.3V / 5V
    - Max Output current: 750mA (at 6.5V input voltage)

    In Stock
  • L9110S DC Stepper Motor...

    £1.66

    A very compact dual channel H-bridge motor driver module. The module incorporates two L9110S H-bridge driver IC's to allow either one stepper or two DC motors to be independently controlled. The module can accept a supply voltage between 2.5 to 12V allowing for motors within this supply...

    In Stock
  • PT2262 Wireless Transmitter...

    £3.33
    The  PT2262 (Tx) transmitter module is designed to be used in conjunction with the PT2272-M4 (Rx) receiver module (Item HCMODU0049). When used together they are a set of wireless modules operating at 433MHz and utilise the the Princeton Technology Corp PT2262 & PT2272 remote control encoder and decoder IC's. They provide an easy way of remotely controlling up to 4 channels without the need of a...
    In Stock
  • RAMPS compatible LCD...

    £6.66

    This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS compatible shield (HC3DPR0002). Using this module allows you to print your designes without requiring a computer be connected to your printer. The module contains and 20 x 4 line backlit LCD display, buzzer, SD card reader, and control inputs. The module also includes cables and adapter board for...

    In Stock
  • Silicon Labs CP2102 3.3V...

    £2.49

    A high performance USB to UART interface allowing you to communicate with serial devices such as microcontroller UART's using your PC. The module has a silicon labs CP2102 based device and a convenient pin header which includes a 5V and 3.3V supply. Tx and Rx data pins are at 3.3V TTL levels. Virtual COM port drivers are available for Windows, Mac, Linux, and Android operating systems.

    In Stock
  • Pressure Sensor MPS20N0040D-D

    £2.91

    Pressure range :0-5 .8 psi (40kpa);
    Product Features:
    Solid, MEMS technology, high reliability
    Low cost
    Wide monitoring and control media

    In Stock
  • XL60009 DC-DC Step-up Boost...

    £2.49

    This XL6009 DC-DC boost/step-up converter module (HCMODU0091) is based on the XLSemi XL6009 DC-DC converter and is capable of boosting a wide range of input voltages up to a maximum of 45V. It output can supply up to 2.5A out current (dependent on input voltage and operating environment) and has built in thermal limiting protection circuitry...

    In-Stock!
  • 1W 8 Ohm loud speaker with...

    £1.49

    Small 1W 8 Ohm speaker with a self-adhesive gasket allowing for easy attachment to your projects casing. The speak also has colour coded tinned ...

    In Stock
  • 5V 2 Channel 240V AC Solid...

    £4.16

    A two channel relay module (HCMODU0115) featuring 2x Omron G3MB-202P solid state relays. This module is capable of switching an AC voltages between 100 and 240V at up to a 2A current. The module can be controlled from 5V digital source such as an Arduino microcontroller. A resistive type fuse is provided on the module to help protect excessive current draw.

    In-Stock!
  • L298N Stepper Motor Driver...

    £3.33

    Uses ST' L298N chip, can directly drive two 3-30V DC motor, and provide a 5V output interface, power for 5V single-chip circuitry, supports 3.3VMCU control

    In Stock
  • LM2596 DC-DC Step-down PSU...

    £3.74

    This version of LM2596 DC-DC step-down (buck) power supply module includes the very useful addition of an integrated digital voltage meter. The voltage meter is capable of sensing both input and output supply voltages and can be quickly switched between the two by pressing a voltage selection button on the module...

    In-Stock!