GT-U7 GPS Module with EEPROM and active antenna

£9.99
VAT included

This is a compact GPS module made by open-smart and utilises the GT-U7 GPS receiver. The module also includes a USB serial interface which can be accessed via a micro USB connector or directly via its 0.1” pitch serial TTL header (supplied header pins requires soldering). Out of the box the module will automatically output GPS data in the standard NMEA format making it compatible with many types of hardware and software with no configuration required. The module is also supplied with a detachable antenna which connects to the module via a U.FL pigtail cable allowing the antenna to be located in the optimal position.

Quantity
block Currently Out of Stock

This is a compact GPS module made by open-smart and utilises the GT-U7 GPS receiver. The module also includes a USB serial interface which can be accessed via a micro USB connector or directly via its 0.1” pitch serial TTL header (supplied header pins requires soldering). Out of the box the module will automatically output GPS data in the standard NMEA format making it compatible with many types of hardware and software with no configuration required. The module is also supplied with a detachable antenna which connects to the module via a U.FL pigtail cable allowing the antenna to be located in the optimal position.

Specification:

Product code: HCMODU0172

Operating frequency: L1 (1575.42 +/- 10MHz)

Operating voltage: 3.3 - 5.2V

Operating current: normal mode is 50mA, power-saving mode is 30mA

Communication interface: TTL serial port, micro USB interface (can be connected to a computer to debug)

Serial port baud rate: 9600bps

Communication format: 8N1

Interface logic voltage: 3.3V or 5V

External antenna interface: IPX.

Module dimensions: 27.5 x 26.5 x 4mm

Antenna dimensions: 15.3 x 15.3 x 6.8mm

Drivers, Schematic, U-Centre Tool and Arduino example available on our support forum here.

HCMODU0172

Specific References

16 other products in the category