CH340 USB to serial TTL adapter With 5/3V jumper
£1.99
VAT included
A CH340 based USB to serial TTL adapter. This module makes use of the common CH340 USB interface IC to provide a low cost alternative to the FTDI adapter. It also has the additional feature of being able to select 3.3V*/5V TTL levels by linking the VCC pin to either the 3.3V pin or 5V pin using the supplied jumper.
Note: This module is not suitable for use with ESP modules. Please see alternative item HCMODU0076 instead.
Pinnout:
1….5V (USB)
2….VCC (Input, connect to 5V or 3V3 pin via jumper)
3….3V3 (*measured at 3.67V)
4….TXD
5….RXD
6….GND
A CH340 based USB to serial TTL adapter. This module makes use of the common CH340 USB interface IC to provide a low cost alternative to the FTDI adapter. It also has the additional feature of being able to select 3.3V*/5V TTL levels by linking the VCC pin to either the 3.3V pin or 5V pin using the supplied jumper.
Note: This module is not suitable for use with ESP modules. Please see alternative item HCMODU0076 instead.
Pinnout:
1….5V (USB)
2….VCC (Input, connect to 5V or 3V3 pin via jumper)
3….3V3 (*measured at 3.67V)
4….TXD
5….RXD
6….GND
HCMODU0239
42 Items
Specific References
9 other products in the category
USB to RS232 TTL Serial...
USB to RS232 TTL PL2303HX auto converter module adapter with a 5V output, which provides the...
£2.99
8 Channel Bi-directional...
This module uses an array of transistors with pullup resistors to provide an 8 channel...
£2.99
FTDI USB Serial Port Adapter
- FT232RL chip
- Both 5V/3.3V supply outputs
- Supports 300bps~3Mbps between each...
£5.99
- Currently Out of Stock
MicroSD Card Adapter With...
A microSD card reader and writer with included 3.3V regulator and level shifters making safe...
£2.29
microSD card reader module...
A microSD card reader module with built in 3.3V level shifter which allows safe interfacing to...
£3.89
TF/microSD card adapter for...
This simple adaptor will convert your Raspberry Pi to accept a Transflash/microSD card. Its...
£1.99
Silicon Labs CP2102 3.3V...
A high performance USB to UART interface allowing you to communicate with serial devices such...
£2.99
A CH340 based USB to serial TTL adapter. This module makes use of the common CH340 USB interface IC to provide a low cost alternative to the FTDI adapter. It also has the additional feature of being able to select 3.3V*/5V TTL levels by linking the VCC pin to either the 3.3V pin or 5V pin using the supplied jumper.
Note: This module is not suitable for use with ESP modules. Please see alternative item HCMODU0076 instead.
Pinnout:
1….5V (USB)
2….VCC (Input, connect to 5V or 3V3 pin via jumper)
3….3V3 (*measured at 3.67V)
4….TXD
5….RXD
6….GND