USB to RS232 TTL Serial...
USB to RS232 TTL PL2303HX auto converter module adapter with a 5V output, which provides the...
We will be closed from 24th December to 3rd January. However we will be dispatching orders throughout this period when the postal service is in operation.
We would like to wish all our customers, old and new, a very merry Christmas.
Yodel
Please note: Yodel is currently experiencing issues. Whilst the issue is ongoing, orders placed using this service will be dispatched via Evri or Royal Mail 48 hour service.
Allows reading and writing to an SD card from an arduino
Quantity | 1 |
Material | PCB |
Features | Allows reading and writing to an SD card from a microcontroller such as an Arduino development board. |
Application | Data logging, data storage |
PLEASE NOTE that when used with 5V TTL an additional level shifter may be required to covert from 5V to 3.3V TTL levels (see HCCOIC0005) or for an alternative see item HCMODU0044.
PINOUT | |
---|---|
PIN | DESCRIPTION |
1 | GND |
2 | +3.3V |
3 | +5V |
4 | CS |
5 | MOSI |
6 | SCK |
7 | MISO |
8 | GND |
Example Arduino code is available in our support forum here
USB to RS232 TTL PL2303HX auto converter module adapter with a 5V output, which provides the...
A microSD card reader module with built in 3.3V level shifter which allows safe interfacing to...
A microSD card reader and writer with included 3.3V regulator and level shifters making safe...
A high performance USB to UART interface allowing you to communicate with serial devices such...
- FT232RL chip
- Both 5V/3.3V supply outputs
- Supports 300bps~3Mbps between each...
This module uses an array of transistors with pullup resistors to provide an 8 channel...
This simple adaptor will convert your Raspberry Pi to accept a Transflash/microSD card. Its...