This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a 5mm inner hole. The toothed section of the gear measures approximately 7mm, and the bottom part (non-toothed) measures approximately 4mm so total overall length is 11mm approx.
Product Code: HC3DPR0028
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a 5mm inner hole. The toothed section of the gear measures approximately 7mm, and the bottom part (non-toothed) measures approximately 4mm so total overall length is 11mm approx.
Product Code: HC3DPR0028
Excellent for 3D printer heatbeds, this leveling screw set comprises M3 leveling screw...
This 40mm x 40mm fan has a height of 10mm. The rated voltage is 5V with a startup of 2.8V....
This extruder heatsink measures 40mm x 40mm and is 11mm deep. The centre hole is approximately...
3d printer MK7 compatible stainless steel extrusion gear for 1.75mm filament. Includes grub...
A microSD card reader module with built in 3.3V level shifter which allows safe interfacing to...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
Designed for many common types of 3D printers such as Makerbot MK7/MK8, Prusa i3 etc. Solid...
These long 70CM female to female dupont cables sold in 2, 3, and 4 way versions are great for...
A 40W heater cartridge suitable for 3D printers (e.g. Reprap Mendel Prusa) with a 24V supply....
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a...
Optical endstop providing a contactless and reliable alternative to the mechanical...
A thermistor is a type of resistor whose resistance varies significantly with temperature,...
This 26 tooth extruder gear measures approximately 11mm in diameter (toothed end) and has a 5mm inner hole. The toothed section of the gear measures approximately 7mm, and the bottom part (non-toothed) measures approximately 4mm so total overall length is 11mm approx.
Product Code: HC3DPR0028
