The TMP36 is a low voltage, precision centi-grade temperature sensor which is functionally compatible with the LM50. It provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP36 does not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range...
The TMP36 is a low voltage, precision centi-grade temperature sensor which is functionally compatible with the LM50. It provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP36 does not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range. The low output impedance of the TMP36 and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs. It is intended for single-supply operation from 2.7 V to 5.5 V maxi-mum. The supply current runs well below 50 μA, providing very low self-heating—less than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than 0.5 μA.
Specification:
Operating Voltage: 2.7 to 5.5V
Operating temperature range: −40°C to +125°C
Output voltage at 25°C: 750 mV
Output resolution: 10 mV/°C
Package: TO-92
Pinout:
PIN 1....+VS
PIN 2....VOUT
PIN 3....GND
Datasheet available on our support forum here.
Number of Pins: 20
Socket Type: DIL 0.3 Inch
Contact Plating: Tin
The MAX7219 is a compact, serial input/output common-cathode display drivers that interfaces...
The CD74HC30E is a high speed CMOS logic 8-input NAND Gate. The device provides the system...
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
This Texas Instruments 74HC Quadruple 2 input AND gate IC is available in a DIL-16 package. A...
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
Popular Atmel ATMega328P in a surface mount QFP package (HCCOIC0035) as used in development...
The SN74HC139N is a 2-to-4 dual Decoder/Demultiplexer designed for high-performance...
Number of Pins: 8
Socket Type: DIL 0.3 Inch
Contact Plating: Tin
This ST 74HC161 4-bit synchronous binary counter IC is available in a DIL-16 package. A part...
The 74HC238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually...
These ZIF, or Zero Insertion Force sockets incorporate a lever which actuates the zero...
The TMP36 is a low voltage, precision centi-grade temperature sensor which is functionally compatible with the LM50. It provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP36 does not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range...
