The SN74HC377N is an octal positive-edge-triggered D-type Flip-flop with clock enable. It is similar to the HC273 devices, but features a latched clock-enable (CLKEN\) input instead of a common clear. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse, if CLKEN\ is low. Clock triggering occurs...
The SN74HC377N is an octal positive-edge-triggered D-type Flip-flop with clock enable. It is similar to the HC273 devices, but features a latched clock-enable (CLKEN\) input instead of a common clear. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse, if CLKEN\ is low. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When clock is at either the high or low level, the D input has no effect at the output. It is designed to prevent false clocking by transitions at CLKEN\.
Outputs can drive up to 10 LSTTL loads
Eight flip-flops with single-rail outputs
Clock enable latched to avoid false clocking
80µA Maximum low power consumption
12ns Typical tpd
±4mA Output drive at 5V
1µA Maximum low input current
Datasheet available on our support forum here.
The CD74HC30E is a high speed CMOS logic 8-input NAND Gate. The device provides the system...
Contains 5 74HC595 8 bit Serial Shift Register (DIP 16) ICs.
Datasheet is available on...
These 0.3 inch DIL IC Sockets are sold with either 8, 14, 16, 18, 20, 24 or 28 pins. The...
The SN74HC139N is a 2-to-4 dual Decoder/Demultiplexer designed for high-performance...
The Texas Instruments 74HC02N Quad 2-input NOR gate is available in a DIL-14 package. It has...
The L293D is a quadruple high-current half-H driver. The L293D is designed to provide...
The ATMega328 is the chip used in Arduino Uno development boards and is pre-programmed with...
Number of Pins: 20
Socket Type: DIL 0.3 Inch
Contact Plating: Tin
The TMP36 is a low voltage, precision centi-grade temperature...
The MAX7219 is a compact, serial input/output common-cathode display drivers that interfaces...
Popular Atmel ATMega328P in a surface mount QFP package (HCCOIC0035) as used in development...
The SN74HC377N is an octal positive-edge-triggered D-type Flip-flop with clock enable. It is similar to the HC273 devices, but features a latched clock-enable (CLKEN\) input instead of a common clear. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse, if CLKEN\ is low. Clock triggering occurs...
