DS05-NFC 360 degree servo
The DS05-NFC high torque servo (HCROBO0050) is able to rotate continuously in full 360...
Our phone lines are currently down due to issues causing during the recent flooding. If you need to contact us please email sales@hobbycomponents.com
Smart Car Robot Plastic DC 3V-6V Drive Gear Motor with tire
Smart Car Robot Plastic DC 3V-6V Drive Gear Motor with tire
DC motor reducer, single axis, with DC 3-6V operating voltage and a RPM of 125R / minute, this gear box is applied for tracing car or robot. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inch long, 0.85 inch wide and 0.7 inch thick.
Features:
Working Voltage |
Parameters |
DC 3V |
DC 5V |
DC 6V |
Motor Parameters (No Gear Box) |
RPM |
125R / minute |
||
Current |
80-100mA |
|||
Gear Box Parameters |
Reduction |
48:1 |
||
No-load Speed |
125R/minute |
200R/minute |
230R/minute |
|
Load Speed |
95R/minute |
152R/minute |
175R/minute |
|
Output Torque |
0.8kg.cm |
1.0kg.cm |
1.1kg.cm |
|
No-load car speed |
25.9meter/minute |
41.4meter/minute |
47.7meter/minute |
|
Current |
110-130mA |
120-140mA |
130-150mA |
|
Max wheel diameter |
6.5cm |
|||
Dimensions |
70mm x 22mm x 18mm |
|||
Weight |
50g |
|||
Noise |
<65dB |
The DS05-NFC high torque servo (HCROBO0050) is able to rotate continuously in full 360...
MG90S is a metal geared version of the extremely popular MG90 9g servo. The servo has a...
These propellers measure 4cm (40mm). The fixed aperture in the centre measures approximately...
This N20 motor is has a 6V supply voltage and comes complete with a built-in metal gear box....
A small low profile, low power 5V DC motor with a no load rotational speed of 5600 RPM and no...
This N20 micro geared motor comes complete with a purpose designed friction fit wheel....
A tiny vibrating DC motor measuring just 8 x 5mm (excluding shaft). Ideal for various...
Standard low voltage '130' type DC motor with two solderable terminals.
This item is an electrically operated fail secure latch type lock. It uses a solenoid...
A larger version of our standard Nema 17 type stepper motor. This stepper motor (HCROBO0051)...
The MG946R Servo is a popular high speed, high torque metal gear digital servo providing...
The ULN2003 Stepper Motor Driver Board uses a ULN2003 IC to drive 4-phase, 5-wire stepper...